Author Topic: First Osage Bow (Many picture)  (Read 6512 times)

0 Members and 1 Guest are viewing this topic.

Far East Archer

  • Guest
First Osage Bow (Many picture)
« on: August 30, 2008, 03:05:47 pm »
Heya guys!  :)

I dont think I posted this here yet, sorry if you already seen it.  :P
Made this maybe month ago from a stave I had gotten from ebay.  ;D They have good stuff there!

Anyway, it is 64" long, 65#@26".
Has about 3/4" reflex, originally 1" of deflex in top limb and straight bottom limb. Rings are pretty thin, but I like thin rings if the ratio is good.  :)

Here are the pictures!  ;D




































Hope my work did osage justice, if not, spare me! LOL

Alex

Offline Dano

  • Member
  • Posts: 1,349
Re: First Osage Bow (Many picture)
« Reply #1 on: August 30, 2008, 03:14:06 pm »
WOW!! Very nice. Is that Python skin?
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,597
Re: First Osage Bow (Many picture)
« Reply #2 on: August 30, 2008, 03:21:31 pm »
Very nice bow. Not bad for your first....osage bow! ;D Very classy looking. I especially like the cherry bark wrap at the end of the skins. Can you explain how you did it?      Pat

ps. the tiller looks great as always!
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
Re: First Osage Bow (Many picture)
« Reply #3 on: August 30, 2008, 03:25:07 pm »
i remember this one, very nice. i cant rememer, is that tru-oil? at any rate, very well done!

Phil
stalk softly, and carry a bent stick.

Offline bcbull

  • Member
  • Posts: 541
Re: First Osage Bow (Many picture)
« Reply #4 on: August 30, 2008, 03:27:47 pm »
 WOW,,,,,, THATS VERY NICE, I RELLEY LIKE THE TIPS AND THE CHERRY BARK ,, YOU SURE DID DO OSAGE JUSTICE . THIS ONE SHOULD BE IN BOM     BROCK                                                                                                                       

Offline DanaM

  • Member
  • Posts: 9,211
Re: First Osage Bow (Many picture)
« Reply #5 on: August 30, 2008, 03:43:08 pm »
holywuheh dats a nice bow :) Love the skins with the black tips and cherry bark border, quite stunning
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Woodland Roamer

  • Member
  • Posts: 634
Re: First Osage Bow (Many picture)
« Reply #6 on: August 30, 2008, 09:20:10 pm »
That's a beauty! You did a fine job on your first osage. What kind of skins are those?

Alan
Alan Shook-Taylorsville NC

Bring back the Stone Age!

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: First Osage Bow (Many picture)
« Reply #7 on: August 30, 2008, 09:29:22 pm »
Everybody commented for me ;D. That's a fine looking bow! Love those black tips and a few pictures down figured out it was cherry bark and not red thread. That tiller is right on!
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: First Osage Bow (Many picture)
« Reply #8 on: August 30, 2008, 09:51:31 pm »
That is an awesome bow! Well done. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Badbill

  • Guest
Re: First Osage Bow (Many picture)
« Reply #9 on: August 31, 2008, 01:03:30 am »
Sweet!

Far East Archer

  • Guest
Re: First Osage Bow (Many picture)
« Reply #10 on: August 31, 2008, 01:11:23 am »
Heya guys!

Wow, this nice treat to wake up to! I guess I passed haha ;D
Ok, I try answer questions now.

Dano & Alan,
Thanks guys! This skin is from python! It is much thicker than normal snake skin and really big. I had small problem with it as the skin has a spine like thing and makes a ridge in middle.

Pat,
Thanks mate!
The cherry bark was quite pain in @$%! to put on since I only had titebond. (If you have like rubber cement, use it!) What you do is you glue down one edge and after its dry, brush on more glue and then wrap around until it over laps. Keep a finger on it and then wrap it with artificial sinew. (because it is wide and wont dent as much) If its done tight, you should have a clean fit, then you just trim the overlap and sand with fine grit. Btw, its easiest on round surface, so like on arrows and such that dont have big flat surface.

Phil,
Thanks man!
It is some type urethane finish, it looks good but not very durable. I will re-coat with something thicker later.

Santa Dana,
haha love the name, and thanks much!

Cowboy,
haha yeah, you are smokin' man! but hey, that is an awesome bow! Oh and thanks a bunch!

Jawge,
Thank you friend!



Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: First Osage Bow (Many picture)
« Reply #11 on: August 31, 2008, 01:29:28 am »
Thats a very nice bow Alex.  8) great job. ;D
Its November, I'm gone hunt'in.......
Osage is still better.....

Offline Badger

  • Member
  • Posts: 8,120
Re: First Osage Bow (Many picture)
« Reply #12 on: August 31, 2008, 02:36:19 am »
Everything came out nice, design, tiller and finish. Great job on that one!  Steve

Offline Shaun

  • Member
  • Posts: 257
Re: First Osage Bow (Many picture)
« Reply #13 on: August 31, 2008, 05:47:19 am »
What everyone else said plus nice set of photographs to display your work. Keep up the fine work.

Offline cracker

  • Member
  • Posts: 3,123
Re: First Osage Bow (Many picture)
« Reply #14 on: August 31, 2008, 11:31:00 am »
Great looking bow.R.C.
If we can't help each other what is the point of being here?