« previous next »
Pages: [1]

Author Topic: Honey Locust with white wood??  (Read 2167 times)

0 Members and 1 Guest are viewing this topic.

Papa Matt

  • Guest
Honey Locust with white wood??
« on: July 21, 2008, 12:22:38 pm »
When making a bow from HL, is it best to leave some white wood on the back or make the entire bow from heartwood, like you would hedge or black locust?

~Matt
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Honey Locust with white wood??
« Reply #1 on: July 21, 2008, 12:49:20 pm »
I believe HL should be treated like white wood. I have not used it for bows though.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline John K

  • Member
  • Posts: 1,936
Re: Honey Locust with white wood??
« Reply #2 on: July 22, 2008, 02:31:41 pm »
I'm working on a piece right now and i would take the sap wood off, the heart wood is some strong stuff !!
Logged
The only way to fail is to never start !

Papa Matt

  • Guest
Re: Honey Locust with white wood??
« Reply #3 on: July 22, 2008, 05:39:17 pm »
John~

  So you would treat it like it's cousin Black?

~Matt
Logged

Offline John K

  • Member
  • Posts: 1,936
Re: Honey Locust with white wood??
« Reply #4 on: July 22, 2008, 06:00:04 pm »
I have not got to make a bow out of it yet, but i have one ruffed out and i went down the heart wood....i think a little of the sap wood would be ok, but it sure is a lot softer than the heart wood, so i guess i would say yes treat it like it's cousin Black Locust.

Good luck and keep us posted !

John
Logged
The only way to fail is to never start !
Pages: [1]
« previous next »