« previous next »
Pages: [1]

Author Topic: Maple Backed ERC fulldraw  (Read 2497 times)

0 Members and 1 Guest are viewing this topic.

grantmac

  • Guest
Maple Backed ERC fulldraw
« on: June 29, 2008, 08:11:51 pm »
For those who haven't seen it in the Build-along section here is the full-draw for my Maple backed ERC warbow. It just meets the lower end of the warbow requirements of 83@31" but I figured it would be a good stepping stone. I am really pleased with this wood combination as well, it feels very light in the hand. That is also the first arrow I've made, used a 3/8 maple dowel.


Thanks for all the help!
           Grant
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Maple Backed ERC fulldraw
« Reply #1 on: June 29, 2008, 08:45:34 pm »
Grant, the tiller looks good. That ought to be a good combo.      Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dano

  • Member
  • Posts: 1,349
Re: Maple Backed ERC fulldraw
« Reply #2 on: June 29, 2008, 10:48:51 pm »
Nice work Grant.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

grantmac

  • Guest
Re: Maple Backed ERC fulldraw
« Reply #3 on: June 30, 2008, 01:24:09 am »
Thanks for the replys guys!
This has been a fun bow to make and I really like this wood combination, it's so easy to work and smells wonderful. My only complaint is that it dings easily but that will train me for when I've make a Yew selfbow 8)
Next project will try for 95#@32" and be long enough to pike it up to 105#@32" so I'm not constantly making bows when I want to up weight. I'm hoping to be shooting 110+ by this time next year.
       Cheers,
              Grant
Logged
Pages: [1]
« previous next »