Author Topic: Bending Hickory  (Read 7381 times)

0 Members and 2 Guests are viewing this topic.

Offline StrawHat

  • Member
  • Posts: 6
Bending Hickory
« on: January 31, 2023, 01:20:57 pm »
What method is better for bending recurves into a hickory bow? Dry heat, steam, or boil? And what is a safe amount of recurve?
Same question for white oak.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bending Hickory
« Reply #1 on: January 31, 2023, 04:19:29 pm »
Steam or boil for both woods. You'll get all sorts of answers about the safe amount of recurve. If you haven't made a recurve before I'd suggest you start with reflexed tips and once you get that worked out move on to small recurves and go up from there. Reflexing the last 8" to 10" a couple of inches would probably be a good start.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC