Author Topic: New trade points mounted (Read 6823 times)

Pappy · « **on:** May 20, 2008, 06:55:31 am »

Got my trade points mounted,they are 160 grain and shoot like darts.They are mounted on Hickory shafts with Turkey feather fletch.I didn't selfnock them because I barrel tapered the shafts and
there wasn't enough wood left.The whole arrow weighs around 650 grains.

They are 50/1000
thick and you can put an edge on them like a razer.
Pappy

[attachment deleted by admin]

radius · « **Reply #1 on:** May 20, 2008, 07:44:41 am »

what did you make them from, Paps?

Little John · « **Reply #2 on:** May 20, 2008, 09:20:21 am »

Those trade points are fun huh Pappy. Looking good. Kenneth

Pappy · « **Reply #3 on:** May 20, 2008, 09:34:21 am »

Thanks,I made them from a bandsaw blade that came from a big cut off saw at the Nissan plant.I
have a friend that is in the maintenance dept.and when they can't repair the blade they throw them away.He brings them to me and I make knifes,scrapers and trade points.

Pappy

TRACY · « **Reply #4 on:** May 20, 2008, 10:04:00 am »

I really like the looks of them. They look like they'll zip through and keep on truckin.

Tracy

Dustybaer · « **Reply #5 on:** May 20, 2008, 10:55:56 am »

they sure look deadly. did you sahrpen them on one side (like grizzlys) or both?

Pappy · « **Reply #6 on:** May 20, 2008, 11:05:08 am »

No ,I sharpened them on both sides,I am sure they will do the job,now all I need is for you to come on over and use some on a deer.Maybe someday you can.

Pappy

Pat B · « **Reply #7 on:** May 20, 2008, 12:39:28 pm »

Pappy, Those are quite deadly looking and with the hickory shafts you ought to be able to punch a hole in just about any animal you shoot at.
I believe that in NC those would be considered a barbed point(illegal) because of the side slots. I don't get it but apparently the "powers..." don't either.

I wouldn't hesitate to hunt anything with that set-up!

Pat

Dustybaer · « **Reply #8 on:** May 20, 2008, 01:32:40 pm »

deal pappy. can't wait to get back "home".

DanaM · « **Reply #9 on:** May 20, 2008, 01:53:32 pm »

Nice stickers Pappy, whats the dimensions on em? length x width?

John K · « **Reply #10 on:** May 20, 2008, 02:09:54 pm »

They look good Pappy ! I would think that Hickory would make a tuff arrow !!

Kegan · « **Reply #11 on:** May 20, 2008, 08:21:45 pm »

Look wicked to me. I'm glad I'm a two legger, and not a four-legger

.

DBernier · « **Reply #12 on:** May 20, 2008, 10:03:38 pm »

Nice job and nice looking Pappy.

Dick

George Tsoukalas · « **Reply #13 on:** May 20, 2008, 10:41:40 pm »

Very nice, Pappy. Hope you get a deer. Jawge

Pappy · « **Reply #14 on:** May 21, 2008, 07:16:47 am »

Thanks,I think they will,if I don't it won't be because of the head.Ya John from what I have seen so far they are tough,a little trouble to get straight but seem to stay straight after you get them straight and sealed.Pat I ant sure on the barbed I guess I should check,but to be honest I don't think or Warden would know the difference,he already thinks I am crazy for hunting with the stuff I hunt with anyway. Dana I will measure them and get back to you I think they are 1 inch wide and
1 3/4 long and made out of 50/1000 thick band saw blade,they weight 160 grains.
Pappy

Primitive Archer