Author Topic: Knotty Black locust asymmetric 66# @ 27”  (Read 2619 times)

0 Members and 1 Guest are viewing this topic.

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Knotty Black locust asymmetric 66# @ 27”
« on: March 10, 2022, 07:52:41 pm »
Here’s a black locust bow I recently finished. The stave had a couple big knots that I didn’t want to place in the same limb, so I placed the handle right betweeen them. This made the top limb 33” long and the bottom limb is 23”. I made the limbs 2”wide from fade to mid limb then tapering to justs under 1/2”. The bottom knock had a good sized knot in it and a decent wiggle too. So I left it fat with no overlay. The top limb got a pink ivory overlay. I heat treated it flat after I got it braced. It took about 1” set on the top limb and about 5/8” on the bottom limb. I ended up cutting the leather for the handle wrap a little crooked. But, it works just fine. It was sewn on wet and let to dry tight. It’s finished with a coat of linseed oil, then 6 coats of truoil, followed by a quick blast of rattle can satin lacquer. It shoots surprisingly smoothly. No different than anything else I’ve shot.

Thanks for looking

Kyle

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #1 on: March 10, 2022, 07:53:55 pm »
A few more

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #2 on: March 10, 2022, 07:55:00 pm »
Some more

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #3 on: March 10, 2022, 07:56:04 pm »
Last batch

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #4 on: March 10, 2022, 08:18:43 pm »
Cool bow Kyle.I like it.Lots of character with a good amount of poundage.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Bob Barnes

  • Member
  • Posts: 942
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #5 on: March 10, 2022, 08:21:08 pm »
What Ed said Kyle...you really let the wood decide what it would look like and got a very nice bow out of it.   :OK
Seems like common sense isn't very common any more...

Offline rps3

  • Member
  • Posts: 1,514
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #6 on: March 10, 2022, 08:42:37 pm »
Talk about letting the wood tell you what it wants. Cool looking bow in all aspects.

Offline Will B

  • Member
  • Posts: 1,022
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #7 on: March 10, 2022, 09:02:20 pm »
Very cool design on a beautiful and challenging black locust stave. Very nice work!

Offline Kidder

  • Member
  • Posts: 637
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #8 on: March 10, 2022, 10:00:27 pm »
That bow has character like none other. I can’t help but think the knots look like saggy skin in an elbow! Obviously an advanced build that you nailed there - great job!

Offline PaSteve

  • Member
  • Posts: 816
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #9 on: March 11, 2022, 09:27:04 am »
Beautiful bow. A great example that an asymmetrical design executed properly can make a good shooting bow. Love the character, too.
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #10 on: March 11, 2022, 12:57:43 pm »
Very cool... good navigating skills
DevilsBeachSelfbows

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #11 on: March 11, 2022, 01:40:53 pm »
That will certainly get their attention.

Nicely done Kyle

Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #12 on: March 12, 2022, 09:42:20 am »
Excellent tiller. Thanks for sharing. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline rps3

  • Member
  • Posts: 1,514
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #13 on: March 12, 2022, 01:47:37 pm »
I've experienced the same situation with knots and would have never considered making one limb 10 inches longer than the other. You've added a new plan to my arsenal. I can't wait for a stave that fits the bill.

Offline Buckskinner

  • Member
  • Posts: 211
Re: Knotty Black locust asymmetric 66# @ 27”
« Reply #14 on: March 12, 2022, 06:54:12 pm »
That's a sweet bow oozing with character!