Author Topic: Dano  (Read 8920 times)

0 Members and 1 Guest are viewing this topic.

Offline WhistlingBadger

  • Member
  • Posts: 1,775
  • Future Expert
Re: Dano
« Reply #30 on: February 18, 2022, 06:04:31 pm »
Wow, what a beauty.  The curve is just beautiful.

If anyone wants to look at what a well tillered bow looks like. Well you don’t have to look any further. Marc you really have perfected it.

Bjrogg

PS  I was think I have a bow I made that looks almost exactly like that. Then I looked at a full draw picture and it’s not bad, but it’s not as good as Marc’s
Yep.  I haven't achieved perfection, but I think it looks a whole lot like that.
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline GlisGlis

  • Member
  • Posts: 1,565
Re: Dano
« Reply #31 on: February 19, 2022, 05:53:43 am »
So good
no frills and fancies to distract you from pure beauty  :OK

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Dano
« Reply #32 on: February 19, 2022, 08:17:30 am »
Once it gets nicer out I'll put a few more arrows through her

I have some gut string for serving tennis rackets I bought several years ago that I'd like to try and make a string with for this bow, I'd bought it when I had an interest in flight shooting.  I just need to figure out how to go about doing it
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline sleek

  • Member
  • Posts: 6,764
Re: Dano
« Reply #33 on: February 19, 2022, 08:58:03 am »
Once it gets nicer out I'll put a few more arrows through her

I have some gut string for serving tennis rackets I bought several years ago that I'd like to try and make a string with for this bow, I'd bought it when I had an interest in flight shooting.  I just need to figure out how to go about doing it

Are you thinking about taking it to the salt flats?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline M2A

  • Member
  • Posts: 878
Re: Dano
« Reply #34 on: February 19, 2022, 09:45:06 am »
Real nice! thanks for sharing. What's the width at the nocks if you dont mind me asking.
Mike

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Dano
« Reply #35 on: February 19, 2022, 05:07:15 pm »
Nope, not going to the flats

The nocks are 1/2" wide at the shoulder
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline sleek

  • Member
  • Posts: 6,764
Re: Dano
« Reply #36 on: February 19, 2022, 05:17:45 pm »
Thats a shame. If you decide you want it shot, I'd be happy to shoot it at the flats and send it back to you.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Dano
« Reply #37 on: February 19, 2022, 06:27:43 pm »
Thats a shame. If you decide you want it shot, I'd be happy to shoot it at the flats and send it back to you.

Not likely to be competitive since you would have to shoot it in then unlimited class and at 55# it probably wouldn't compete with the heavier bows that could shoot in the class
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline superdav95

  • Member
  • Posts: 2,116
  • 3432614095
Re: Dano
« Reply #38 on: February 19, 2022, 08:10:44 pm »
This is a sweet little bow.  Nicely done. 
Sticks and stones and other poky stabby things.

superdav95@gmail.com

Offline PaulN/KS

  • Member
  • Posts: 1,388
Re: Dano
« Reply #39 on: March 02, 2022, 09:36:48 pm »
I remember Dano. Saw him the last time maybe 14 years ago at Ojam and gave him a couple staves.
That's a fine bow there Sir and a good remembrance...  :OK

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Dano
« Reply #40 on: March 03, 2022, 09:04:05 am »
I remember Dano. Saw him the last time maybe 14 years ago at Ojam and gave him a couple staves.
That's a fine bow there Sir and a good remembrance...  :OK

That might not be the same Dano.  I remember there was one guy who went by the name Dano that frequented the Leatherwall and Tradgang, not the same guy
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline PaulN/KS

  • Member
  • Posts: 1,388
Re: Dano
« Reply #41 on: March 04, 2022, 01:51:47 pm »
I remember Dano. Saw him the last time maybe 14 years ago at Ojam and gave him a couple staves.
That's a fine bow there Sir and a good remembrance...  :OK

That might not be the same Dano.  I remember there was one guy who went by the name Dano that frequented the Leatherwall and Tradgang, not the same guy

Ah, with the same names I guess it got me confused...  ???

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Dano
« Reply #42 on: March 05, 2022, 08:39:56 am »
Seems like there was another Dano who lived in Arizona who was an outstanding bow maker and all-round nice guy.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Dano
« Reply #43 on: March 05, 2022, 09:28:15 am »
The Dano I'm talking about disappeared in the early 2000's, I think he kind of pissed off a few people when he did
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline PaulN/KS

  • Member
  • Posts: 1,388
Re: Dano
« Reply #44 on: March 05, 2022, 01:13:28 pm »
Seems like there was another Dano who lived in Arizona who was an outstanding bow maker and all-round nice guy.

Yep, that's the Dano I was talking about. He'd come up to Mojam,where I first met him, and hung out with Micky aka: Ferret.