Author Topic: Red Oak log diameter for staves  (Read 1462 times)

0 Members and 1 Guest are viewing this topic.

Offline zonic

  • Member
  • Posts: 12
Red Oak log diameter for staves
« on: December 26, 2021, 01:33:55 pm »
I had a large Red Oak come down last month, most of tree is off the ground. I've been eyeing a couple straighter sections to consider for stave logs. What's a good diameter log, to split Red Oak staves from. I'm looking at one section about 5.5" in diameter and another about 11" in diameter. Thanks!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Red Oak log diameter for staves
« Reply #1 on: December 26, 2021, 03:26:16 pm »
I'd say anything 2" and up.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline zonic

  • Member
  • Posts: 12
Re: Red Oak log diameter for staves
« Reply #2 on: December 26, 2021, 06:16:02 pm »
Great to know. Thanks Pat.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Red Oak log diameter for staves
« Reply #3 on: December 27, 2021, 10:53:43 am »
Yes but be wary since the log was out in the weather for awhile. jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Red Oak log diameter for staves
« Reply #4 on: December 27, 2021, 12:02:49 pm »
I agree with George and you want to use the whitewood right under the bark.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline zonic

  • Member
  • Posts: 12
Re: Red Oak log diameter for staves
« Reply #5 on: December 27, 2021, 08:29:47 pm »
Thanks Jawge.

Offline Hamish

  • Member
  • Posts: 1,557
Re: Red Oak log diameter for staves
« Reply #6 on: December 27, 2021, 09:48:22 pm »
 Hard to tell from the photo whether that discoloration in the under bark  sapwood is fungus. Looks suspicious to me.