« previous next »
Pages: [1] 2

Author Topic: 1st "Successful" bow.  (Read 2671 times)

0 Members and 1 Guest are viewing this topic.

Offline Fractured

  • Member
  • Posts: 22
1st "Successful" bow.
« on: August 16, 2020, 02:48:12 pm »
So after previously posting a failed attempt at a bow and receiving some great feedback I got back to work and completed my first successful and shootable bow.  I would love some feed back on this one.  It is a 66 inch NtN red oak  pyramid style board bow which pulls 40 pounds at 28.5 inches.  Stiff handle and cut in shelf and unbacked.  I finished it with several coats of tru-oil.

My first step was to ditch the FG tape which has been banished from my workshop forever...   :OK

I stuck with a familiar design and tried to keep it simple. 

Worked on the transition of the fades to make them smoother.

Here are some pics.

Bow4 by Matthew Chodat, on Flickr
Bow4 by Matthew Chodat, on Flickr
Bow4 by Matthew Chodat, on Flickr
Bow4 by Matthew Chodat, on Flickr
Bow4 by Matthew Chodat, on Flickr
Bow4 by Matthew Chodat, on Flickr
Bow4 by Matthew Chodat, on Flickr


I would appreciate any feedback!

One question as well.  Would it be possible to heat treat in its finished state or would that affect the tru-oil finish?

Thanks!
Fractured

Logged

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: 1st "Successful" bow.
« Reply #1 on: August 16, 2020, 02:54:57 pm »
  Excellent bend!
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: 1st "Successful" bow.
« Reply #2 on: August 16, 2020, 03:02:09 pm »
Very nice great job! nice finish to !
Logged
If you fear failure you will never Try !

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: 1st "Successful" bow.
« Reply #3 on: August 16, 2020, 03:09:28 pm »
congratulations,, very nice,, :)
Logged

Offline PaSteve

  • Member
  • Posts: 816
Re: 1st "Successful" bow.
« Reply #4 on: August 16, 2020, 03:11:34 pm »
Congrats on your bow. Looks really nice to me. Well done!
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: 1st "Successful" bow.
« Reply #5 on: August 16, 2020, 04:00:06 pm »
Well done :)
... just never mention that tape ever again...  ;)
Once you get up that learning curve it all starts to make sense :)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: 1st "Successful" bow.
« Reply #6 on: August 16, 2020, 04:49:36 pm »
Heat treating a true oil finish? I wood say yes but you may end up refinishing the bow. Maybe someone will address that . Nice build by the way.  Arvin
Logged
Well I'll say!!  Osage is king!!

Offline willie

  • Member
  • Posts: 3,268
Re: 1st "Successful" bow.
« Reply #7 on: August 16, 2020, 06:39:02 pm »
nice work. if your feeling successful, do the heat treat on the second or third bow.
It would be a shame to push it too far make two tomato stakes out of it.
Looks like from a stave? or a thick board?
Logged

Offline M2A

  • Member
  • Posts: 878
Re: 1st "Successful" bow.
« Reply #8 on: August 16, 2020, 07:26:05 pm »
Congrats! Nice 1st bow, wish mine looked that good.

I agree with Willie about the heat treat.... but if you do check the tiller after cause it may need to be adjusted again.

Mike   

Logged

Offline Fractured

  • Member
  • Posts: 22
Re: 1st "Successful" bow.
« Reply #9 on: August 16, 2020, 07:45:43 pm »
Quote from: willie on August 16, 2020, 06:39:02 pm
nice work. if your feeling successful, do the heat treat on the second or third bow.
It would be a shame to push it too far make two tomato stakes out of it.
Looks like from a stave? or a thick board?

Good call.  I’ll leave this one be and call it good. 

3/4” red oak board.  Handle section is glued on.
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: 1st "Successful" bow.
« Reply #10 on: August 16, 2020, 11:26:48 pm »
Congratulations!  The first one is the hardest, likewise any new design! :BB >:D (SH)!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Online bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: 1st "Successful" bow.
« Reply #11 on: August 17, 2020, 05:57:30 am »
Very nice. Congrats. Doesn’t it feel great to fling a arrow?

I agree with the heat treat a different one. As you build more bows you’ll find yourself experimenting and pushing the limits more. Usually till you push to far a then back off a little. Can’t do it all on the same bow. Enjoy this one and start on another.

Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: 1st "Successful" bow.
« Reply #12 on: August 17, 2020, 07:05:42 am »
Yup, wait until you've made more and this one is a bit tired and shot... then see what you can do to rejuvenate it. That's what old bows are for... experimenting :)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: 1st "Successful" bow.
« Reply #13 on: August 17, 2020, 07:41:58 am »
Very nice tiller. Congratulations on your first bow! Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Kidder

  • Member
  • Posts: 637
Re: 1st "Successful" bow.
« Reply #14 on: August 17, 2020, 09:02:07 am »
Fantastic!
Logged
Pages: [1] 2
« previous next »