Author Topic: Finish over jute wrap  (Read 1182 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Finish over jute wrap
« on: August 05, 2020, 02:00:34 pm »
Hi guys, can I use a finishing oil over a jute wrap?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Finish over jute wrap
« Reply #1 on: August 05, 2020, 02:31:17 pm »
I haven't used jute handle wrap but on the hemp wraps I do I use Massey finish, 2 part epoxy thinned with acetone.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Stickhead

  • Administrator
  • Member
  • Posts: 940
Re: Finish over jute wrap
« Reply #2 on: August 05, 2020, 03:47:33 pm »
I’ve put Tru Oil over a jute wrap, and it worked fine.  (Until my bow got run over, that is.  It didn’t protect against that worth a darn.)

Offline dylanholderman

  • Member
  • Posts: 787
Re: Finish over jute wrap
« Reply #3 on: August 05, 2020, 09:20:08 pm »
i cant speak to a oil finish but i have done the epoxy finish over a wrap before.
i just used 5min epoxy thinned with 70% isopropoyl alcohol.

bownarra

  • Guest
Re: Finish over jute wrap
« Reply #4 on: August 06, 2020, 12:08:30 am »
Just use watered down pva over the wrap. Lasts for ever.

Offline HighEagle

  • Member
  • Posts: 227
Re: Finish over jute wrap
« Reply #5 on: August 06, 2020, 11:27:43 pm »
    Jute handle wrap finished with Titebond III till dry, Acrylic paint till dry, Some more TB III dry, Then rubbed in some sticky beeswax 
Armstrong, BC

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Finish over jute wrap
« Reply #6 on: August 07, 2020, 05:48:57 am »
A few years back I was putting jute on everything -- thought it looked more primitive. Generally TBll, but also Polyurethane, even just bare.
" To be, or not to be"...decisions, decisions, decisions.