Author Topic: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches  (Read 3530 times)

0 Members and 1 Guest are viewing this topic.

Offline bradsmith2010

  • Member
  • Posts: 5,187
 ok this bow has little bit of back story,,its made from a split of a split, and was pretty questionable if it would make a bow,,
so I tried it just for fun,, had not made a sinew bow in a while and it gave me a good reason to get my stuff together to make one,,I degreased the bow with ashes and boiling water,, and put about 1000 grains of sinew on all at once, not processed very thin,, then wrapped with a string, Im not recommending that,, I think inner tube or ace bandage would be alot better ,,,,
I was working outside and had little day light left and didnt do a very neat job of putting it on,, thus the ugly bow title,, thats how I decribed it to my bow making friend as I worked on it,,
   it had some issues,, knots on side of limb etc,, some roller coaster that I just left,, I did but slight set back and reflex in tips but I would call it moderate,, then I didnt wait to long to string it and shoot it,, less than two weeks,, its very dry here and I can get away with it sometimes,, I was interested to see what it would do anyway,,,, its seems fine,, and was not really picking up weight so I thought it was pretty dry,, probably not cured ,, but shot fine,,
   I made some 23 inch arrows which I have not done much ,, trying to learn about Sioux arrows,, some dogwood some maple and some cedar,, the dogwoods were in the 500 grain weight,, even being short,,
   the cedar arrow was light and I tested with that 417 grains,, I considered that ok for hunting weight for deer,,at that point the ugly bow turned to a Swan,, it shot the 417 grain arrow 182 fps,,,53#@ 23 inches,, I know its not  10 gpp but for the shorter draw bow I thought very respectable and huntable,,
    its my favorite bow to shoot right now,, enjoy the pics,,
« Last Edit: June 22, 2020, 11:05:50 am by bradsmith2010 »

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inces
« Reply #1 on: June 21, 2020, 08:20:01 pm »
pics

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #2 on: June 21, 2020, 08:22:17 pm »
pics

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #3 on: June 21, 2020, 08:24:22 pm »
pics

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #4 on: June 21, 2020, 08:26:31 pm »
more pics,, cowhide scrap handle,,

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #5 on: June 21, 2020, 08:27:30 pm »
full draw 23 inches

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #6 on: June 21, 2020, 08:32:18 pm »
it looked like the grain was splitting a bit on side of bow,,, so I put sinew wrap just in case,, at that point,, it was not gonna hurt the looks,, the tiller has stayed very stabel ,,
as has the weight,, its been several weeks and the bow is the same weight,, so I think its pretty good to go,,, I have noticed in this climate they dont change much once settled in,, the bow was more narrow than I would like on one limb,, buts thats all the wood I had to work with,, the sinew application did not seem to have adverse effect on performance,, I usually do one layer at a time,, and its easier to make it look nice,, Im not gonna try putting it on at one time again,, it was too hard to keep it even,,

Offline bushboy

  • Member
  • Posts: 2,256
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #7 on: June 21, 2020, 10:33:28 pm »
Neat story and equally cool little bender!tiller looks spot on...very nice work!!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #8 on: June 21, 2020, 10:53:10 pm »
thanks Bushboy, i was hesitant to post this one its so rough,, but thought some might enjoy it,, :)

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #9 on: June 22, 2020, 01:28:27 am »
Sweeeet bow, Brad. I like it, can't see why you call here ugly. The profiles are great, esp. fd!
congrats and happy hunting out of the bush - let's see some turkeys.  :G :G :G
Simon
Bavaria, Germany

Offline Hamish

  • Member
  • Posts: 1,506
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #10 on: June 22, 2020, 04:53:21 am »
The sinew job looks pretty ugly, but you have made it safe. Tiller looks good, that's all that really matters. Lovin these short bows.

Offline bassman

  • Member
  • Posts: 962
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #11 on: June 22, 2020, 06:46:26 am »
A lot of nice features in that bow which makes it pretty to me. Nice unbraced profile, and tiller looks great. That is a sweet shorty for sure.

Offline Will B

  • Member
  • Posts: 975
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #12 on: June 22, 2020, 08:26:28 am »
I really like the pics and the tiller/full draw looks really nice. Giving me some ideas for an osage stave with some knots along the edge. Great job!

Offline RandyN

  • Member
  • Posts: 138
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #13 on: June 22, 2020, 09:23:40 am »
Great job Brad. Nice full draw pic shoeing the tiller. Next step is take her to the mountains and do some stump shooting.. That swan will prove to be even better where we stump shoot.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: my ugly bow 48 1/2 nock to nock osage sinew backed 53#@23 inches
« Reply #14 on: June 22, 2020, 10:13:04 am »
    thanks Guys,, I really feel like I learned something with this one,, i am working on two more now, I tried putting on the rawhide with hide glue, I had done that before and it was a little more difficult than I had thoght it would be , but got it on there, I will post some pics here of those two bows,, the sinew looked good on them, but I wanted to add some protection from the weather and didnt have snake, so went with goat skin on one and calf skin on the other,,artwork in progress on both of those,,
     on a side note,, I have put the sinew on running it all the way to the tips,, and also feathering out so no sinew on the tips,or non working area,, on this one I did as Laubin suggested and started at the tips running it over the end to the back and worked to the handle on my first layers, seemed to work fine, my tips were so thin,, I think the sinew helped keep reflex from bending out of the tips,, but I am sure both ways work fine, but thats how I did it on this one and was happy with the resusults,,
« Last Edit: June 22, 2020, 10:50:01 am by bradsmith2010 »