« previous next »
Pages: [1] 2

Author Topic: sinew backed snake skinned Osage bow  (Read 2780 times)

0 Members and 1 Guest are viewing this topic.

Offline bassman

  • Member
  • Posts: 962
sinew backed snake skinned Osage bow
« on: June 20, 2020, 07:02:38 pm »
Material given to me by Will B. Iffy stave with growth rings so thin I couldn't get a ring chased, so I sinew backed it. Split  on the bottom limb repaired with Smooth On.I made the bow for target shooting. The stave was a split from a large stave .63 inches nock to nock , and 35 lbs.at 26 inch draw. At 10 gpp or 350 gr arrow I am getting average  152 fps. Having a lot of fun shooting it at 20 yards.
Logged

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #1 on: June 20, 2020, 07:14:53 pm »
More pics
Logged

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #2 on: June 20, 2020, 07:18:33 pm »
More pics.
Logged

Offline NorthHeart

  • member
  • Member
  • Posts: 494
Re: sinew backed snake skinned Osage bow
« Reply #3 on: June 20, 2020, 08:51:30 pm »
Did you sinew it with wood glue or hide glue?  Nice looking skin job!
Logged

Offline backtowood B2W

  • Member
  • Posts: 574
Re: sinew backed snake skinned Osage bow
« Reply #4 on: June 21, 2020, 02:50:21 am »
like the skins too, and the bend in the Full draw pic looks great! Do you have a unbraced profile pic too.
Interesting how you took care about that split on the bottom limb.
Logged

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #5 on: June 21, 2020, 03:32:48 am »
NH I used wood glue. B2W I have the unbraced profile pic., but my wife forgot to post pic. I will get it posted.
Logged

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #6 on: June 21, 2020, 03:44:35 am »
Also forgot to mention  that I am shooting an 8 strand  D97 low stretch string that always help to pick up fps.
Logged

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #7 on: June 21, 2020, 06:39:06 am »
Unbraced profile is one  a half inches of reflex at the tips.
Logged

Offline PaSteve

  • Member
  • Posts: 816
Re: sinew backed snake skinned Osage bow
« Reply #8 on: June 21, 2020, 08:47:32 am »
Great fix on that bottom limb, Bob. Tiller looks good, as it always does on your bows. Those skins turned out really nice too. Nice bow. Hope your ribs are healing up.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #9 on: June 21, 2020, 09:37:11 am »
Thanks Steve. Not a 100 percent yet ,but doing great. Building again, and shooting bows in the 35lb range, and all the chores around the house.
Logged

Offline Will B

  • Member
  • Posts: 1,022
Re: sinew backed snake skinned Osage bow
« Reply #10 on: June 21, 2020, 06:21:07 pm »
Very nice osage stick. Saw this one in person and it’s really nice!  Great bend.  Nice job Bassman!
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: sinew backed snake skinned Osage bow
« Reply #11 on: June 22, 2020, 01:20:33 am »
Looks good! Tiller in fd is spot on.
63" is a bit long for sinewing, but if it shoots nice - why not.
Logged
Simon
Bavaria, Germany

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: sinew backed snake skinned Osage bow
« Reply #12 on: June 22, 2020, 06:20:39 am »
Looks like it was a challenge.  Well done
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #13 on: June 22, 2020, 06:31:29 am »
simson ,I was looking for a safe shooting, smooth drawing bow for target, so I left it longer than it would have had to have been. If I could have chased a ring on the back I would not have had to sinew back it for insurance . The stave had issues so I am happy with the results. Thanks for your input.
Logged

Offline bassman

  • Member
  • Posts: 962
Re: sinew backed snake skinned Osage bow
« Reply #14 on: June 22, 2020, 06:39:06 am »
Thank you Mark. I got a nice shooting target bow from the stave,and that was my goal, so I am happy.
Logged
Pages: [1] 2
« previous next »