Tiller help and some questions.

[Fox]

I'm Working on another hickory recurve right now its at 45# at 15" aiming for 50 at 27.... The dimensions are 65" long 2" for 20" tapering to an inch (at the moment. I will make the tips smaller later for string alignment) 8" none working handle. and 7" static tips, which i am going to recurve later... like when i get to 20" or so?    Its at a low brace right now ( because i can't get a higher brace on it yet). It has taken about 1/2" of set.  Also whats the best heat treat method? like how long and how hot? usually i cook it over some coals for 30 minutes or so, or use a heat gun... is there a more specific recipe i should use?  ..... sorry so many questions!!    so whdyall's suggestions?  Thanks.

-Fox

20200603_154543 by spyjake9, on Flickr

20200603_151052 by spyjake9, on Flickr

[Ricardovanleeuwen]

Looks like It needs more bend in the right Outer limb viewer from the second picture, also use oil for Heat treating to prevent scorching

[medicinewheel]

Irritating light shed on right limb.