Author Topic: White Oak ALB  (Read 2865 times)

0 Members and 1 Guest are viewing this topic.

Offline RyanY

  • Member
  • Posts: 1,997
White Oak ALB
« on: May 01, 2020, 03:08:46 pm »
Just finished up this White Oak ALB (American Longbow). It is made from a piece of white oak that I cut and tillered years ago while still green. Took a few inches of set at that point but I was able to heat treat it out. Holds very mild reflex while unbraced so I think it evened out. 34#@28", 66" NTN. 4" handle with 3" fades. 1.5" wide at the fades to just under 1.5" at mid limb, and then taper to 3/8" nocks. Nock overlays are of white oak. Limbs are symmetrical in length so I made the limb that took less set the bottom limb. Leather handle and arrow rest with white oak insert at the arrow pass. Had some fun shooting this one as it was the first time using a chronograph. Was shooting around 145fps average with 450 grain arrows or ~13grains/lb, Highest I could get was 152fps. Let me know what you think!

Offline RyanY

  • Member
  • Posts: 1,997
Re: White Oak ALB
« Reply #1 on: May 01, 2020, 03:09:47 pm »
More pics.

Offline RyanY

  • Member
  • Posts: 1,997
Re: White Oak ALB
« Reply #2 on: May 01, 2020, 03:10:50 pm »
More pics.

Offline RyanY

  • Member
  • Posts: 1,997
Re: White Oak ALB
« Reply #3 on: May 01, 2020, 03:12:36 pm »
Last few.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: White Oak ALB
« Reply #4 on: May 01, 2020, 03:36:44 pm »
Nice white oak ALB, Ryan. 152fps for a 34# bow is pretty impressive...and with stitching like that on your handle wrap you could have been a surgeon.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: White Oak ALB
« Reply #5 on: May 01, 2020, 04:58:17 pm »
+1  If you got a 340 grain arrow so you were at 10 gr per pound your speed should go way up.

Offline RyanY

  • Member
  • Posts: 1,997
Re: White Oak ALB
« Reply #6 on: May 01, 2020, 05:21:54 pm »
Thanks guys. I’m curious what it would be with a lighter arrow. I’m really liking this lighter draw weight to get back into shooting more. Hard to make arrows that light though!

Offline PaSteve

  • Member
  • Posts: 816
Re: White Oak ALB
« Reply #7 on: May 01, 2020, 05:57:52 pm »
Beautiful representation of an ALB. That stitching definitely caught my eye. Really nice looking bow.
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline rps3

  • Member
  • Posts: 1,514
Re: White Oak ALB
« Reply #8 on: May 01, 2020, 06:40:44 pm »
I think it looks great,  and pretty snappy too. I agree about making lighter spined arrows. They seem so flimsy.

Offline StickMark

  • Member
  • Posts: 293
Re: White Oak ALB
« Reply #9 on: May 01, 2020, 08:35:50 pm »
Lighter arrows and feeling flimsy, I hear you (31# "retraining bow with 14gpp 435 grain arrows was my answer to your type of arrow question.)
Bet that is a fun bow to shoot.

Offline Stoner

  • Member
  • Posts: 356
Re: White Oak ALB
« Reply #10 on: May 10, 2020, 10:09:23 am »
Beautiful white oak bow. Fine Craftsmanship. I just started to go thru some of my other bow woods and was going to build a white oak bow when I discovered all my wood is cracking/checking. trying to savage what I can. John

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: White Oak ALB
« Reply #11 on: May 10, 2020, 12:06:42 pm »
Very nice. Tiller is excellent. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: White Oak ALB
« Reply #12 on: May 10, 2020, 12:38:07 pm »
Great job. Classic looking ALB and that tiller is spot on.
DevilsBeachSelfbows

Offline silent sniper

  • Member
  • Posts: 281
Re: White Oak ALB
« Reply #13 on: May 10, 2020, 04:39:37 pm »
Beautiful classic ALB 👍🏻. Nice work!

Offline scp

  • Member
  • Posts: 659
Re: White Oak ALB
« Reply #14 on: May 11, 2020, 12:23:03 am »
Very well done. It sure deserves ultra light arrows, even just for speed testing. There must be a way to calculate the 10 GPP arrow speed with the figures you have, at least approximately.