« previous next »
Pages: 1 [2] 3

Author Topic: wooden knife sheath- wip  (Read 12402 times)

0 Members and 1 Guest are viewing this topic.

Offline WhistlingBadger

  • Member
  • Posts: 1,771
  • Future Expert
Re: wooden knife sheath- wip
« Reply #15 on: April 17, 2020, 09:33:50 am »
Wow.  That's going to be beautiful.  Thanks for the inspiration.
Logged
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: wooden knife sheath- wip
« Reply #16 on: April 18, 2020, 04:41:13 am »
Got the roughing out all finished, reference lines are all marked up. Next bit will take maybe 20 hours., haven't done fish scale checkering for about 3 years, wish me luck!
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: wooden knife sheath- wip
« Reply #17 on: April 18, 2020, 06:57:45 am »
That's coming out for you really nice.Lot of time and lots of intricate detail.I should get me some intricate wood carving tools myself sometime.Will you have different colors on it when finished?
I made a sheath out of wood for a large knife once.I decorated it some also.I put brain tan on it and beaded it.Very safe type of sheath to use also.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: wooden knife sheath- wip
« Reply #18 on: April 18, 2020, 08:34:28 am »
Last time I did this I used colour,  time before that I just darkened the background.The grain is all a bit bland so I'll do something,  just not decided on what yet.
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: wooden knife sheath- wip
« Reply #19 on: April 18, 2020, 11:32:18 pm »
AHA!   Bas (raised) relief? (I hope) excellent idea!  I may have my terms mixed up, though!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Stoner

  • Member
  • Posts: 356
Re: wooden knife sheath- wip
« Reply #20 on: April 24, 2020, 08:28:50 pm »
whoa, well done sir. John
Logged

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: wooden knife sheath- wip
« Reply #21 on: April 25, 2020, 06:05:58 am »
Kinda put this  bit off but spent a few hours with a 5mm No7 and a 3mm No 3 (i think) and printed in the scales on one side. Will try and resist the temptation to hollow them until I've done the same to the other side
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: wooden knife sheath- wip
« Reply #22 on: April 25, 2020, 11:39:47 am »
Looking good!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Knocker

  • Member
  • Posts: 271
  • Tumwater, Washington
Re: wooden knife sheath- wip
« Reply #23 on: April 25, 2020, 03:00:52 pm »
I made a wood sheath one time in the NW Coastal style.  The sheath is carved with teeth and a tongue, but a lot of it is obscured with the bear hide backing.

Keith
Logged
If ye love wealth better than liberty, the tranquility of servitude
better than the animating contest of freedom, go home from
us in peace. We ask not your counsels or arms. Crouch down
and lick the hands which feed you. May your chains set
lightly upon you, and may posterity forget ...

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: wooden knife sheath- wip
« Reply #24 on: May 10, 2020, 06:06:04 am »
Wow knocker that's fantastic, thanks for sharing! Here's where I am after about 20 hours, couple more hours left detailing but the fish scale is nearly done. Next is 3 or 4 hours on the leaves, but the end is on sight.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: wooden knife sheath- wip
« Reply #25 on: May 10, 2020, 06:24:53 am »
Very nice wooden sheath and carving.   8)   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BrianS

  • Member
  • Posts: 980
Re: wooden knife sheath- wip
« Reply #26 on: May 10, 2020, 06:57:47 am »
Beautiful Work
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: wooden knife sheath- wip
« Reply #27 on: May 10, 2020, 08:46:05 am »
You do beautiful work but isn't it rather fragile being wood and that thin? I would think it would crack if you looked at it the wrong way.
Logged

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: wooden knife sheath- wip
« Reply #28 on: May 10, 2020, 09:42:42 am »
Well, you'd think so wouldn't you but I've dropped it a half a dozen times and so far so good. Only the handle end is thin,  wirh a thickness of 2mm but it very rapidly thickens up, its over 5mm thick within a half inch
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: wooden knife sheath- wip
« Reply #29 on: May 10, 2020, 09:56:08 am »
OK then :D Carry on ;D ;D
Logged
Pages: 1 [2] 3
« previous next »