« previous next »
Pages: 1 2 3 [4]

Author Topic: Juniper Self bow  (Read 16139 times)

0 Members and 1 Guest are viewing this topic.

Offline WhistlingBadger

  • Member
  • Posts: 1,776
  • Future Expert
Re: Juniper Self bow
« Reply #45 on: November 06, 2019, 10:47:12 am »
Interesting.  When I get around to doing this someday, I want to use heartwood, or a combination, just because it's so dang pretty!  Would I be right assuming the performance difference with sinew backing would be minimal?
Logged
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline loefflerchuck

  • Member
  • Posts: 1,129
    • www.heartwoodbows.com
Re: Juniper Self bow
« Reply #46 on: November 07, 2019, 09:55:52 am »
Sapwood is not much different than heartwood in performance as long as it has a sinew back. Not really noticeable and yes it is cool looking heartwood.
Logged

Offline willie

  • Member
  • Posts: 3,268
Re: Juniper Self bow
« Reply #47 on: November 07, 2019, 02:23:23 pm »
Quote from: loefflerchuck on November 06, 2019, 10:11:55 am
My favorite stave is the unbroken sapwood layer under the bark.

do you keep the unbroken? (unblemished outermost ring?) of sapwood on the belly,and apply the sinew to younger wood from inside the stave?
Logged

Offline loefflerchuck

  • Member
  • Posts: 1,129
    • www.heartwoodbows.com
Re: Juniper Self bow
« Reply #48 on: November 07, 2019, 07:30:48 pm »
Younger wood from the inside of a stave??   

It would be neat to try adding sinew to the inside of a stave, but i stick with the back being the back for ring orientation and a back that does not cut through the grain.
Logged
Pages: 1 2 3 [4]
« previous next »