Author Topic: Yew Warbow  (Read 25519 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Warbow
« Reply #15 on: April 14, 2008, 12:05:39 am »
Paul
A stone is equal to 14#
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Yew Warbow
« Reply #16 on: April 14, 2008, 12:37:19 am »
Thanks Marc - that's cool! Must be an old European measure of weight.
 Steve: Sounds to me that if your 11stone weight and pulling 125 lbs @ 32" - then your plenty stout :). Aught to be able to handle war bows..
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Lost Arra

  • Member
  • Posts: 121
Re: Yew Warbow
« Reply #17 on: April 14, 2008, 01:06:01 am »
Marc: what do you use to polish the horn?

stevesjem

  • Guest
Re: Yew Warbow
« Reply #18 on: April 14, 2008, 07:00:28 am »
Thanks Marc - that's cool! Must be an old European measure of weight.
 Steve: Sounds to me that if your 11stone weight and pulling 125 lbs @ 32" - then your plenty stout :). Aught to be able to handle war bows..

Hi Cowboy
Well i don't know about stout, i've never been called that before, now if this bow comes out at 154lb then i have got to try and shoot 100% of my body weight at the moment i am shooting approx 82% of my body weight comfortably, so we will see.

Cheers

Steve

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Warbow
« Reply #19 on: April 14, 2008, 10:13:18 am »
The string on this bow is a FF string, I would have used a 14 strand for better performance but Steve wanted a 20 strand string.

After rough shaping the horn I started out with 100 grit paper and worked my way down to 300 grit. I then polished it up with steel wool.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

eduardbilanin

  • Guest
Re: Yew Warbow
« Reply #20 on: April 14, 2008, 01:09:45 pm »
Marc........you are an great bowyer.
« Last Edit: April 14, 2008, 05:18:39 pm by eduardbilanin »

Offline Yeomanbowman

  • Member
  • Posts: 283
    • warbowwales
Re: Yew Warbow
« Reply #21 on: April 14, 2008, 07:54:40 pm »
I cannot see Marc's images is it just me?

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Warbow
« Reply #22 on: April 14, 2008, 09:19:57 pm »
No it's not you. Looks like my web site is down again.  Should be back up later or at least tomorrow
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Badger

  • Member
  • Posts: 8,124
Re: Yew Warbow
« Reply #23 on: April 15, 2008, 01:22:01 am »
Mark, I am really excited to see one of your bows going over to europe. I can't wait to hear the results. When are you going to ship it out? Steve

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Warbow
« Reply #24 on: April 15, 2008, 12:12:01 pm »
Actually Steve if I were to tiller a warbow for flight I would tiller it differently than this.  This bow should handle heavy arrows well though.

It went out yesterday
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Warbow
« Reply #25 on: April 15, 2008, 12:24:11 pm »
Nice work Marc, I'm looking foward to seeing this bow being shot, I'll try and get a bit of film of Mark shooting it.

That would be great Nick
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Slivershooter

  • Guest
Re: Yew Warbow
« Reply #26 on: April 17, 2008, 03:22:35 am »
Marc, Another beauty!

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
Re: Yew Warbow
« Reply #27 on: April 17, 2008, 09:07:44 pm »
The string on this bow is a FF string, I would have used a 14 strand for better performance but Steve wanted a 20 strand string.


with that much weight i was wondering how many strands. do you know offhand what the lbs to strands ratio is?
stalk softly, and carry a bent stick.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Yew Warbow
« Reply #28 on: April 17, 2008, 10:43:43 pm »
I had some bad news from Steve today. The bow came in damaged.  Really pisses me off.  I shipped the bow by UPS and had packaged it quite well in a re-enforced triangular cardboard box. I hope the damage is not too serious

BHI. The FF string I use has a claimed break strength of 90 lbs.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline adb

  • Member
  • Posts: 5,339
Re: Yew Warbow
« Reply #29 on: April 17, 2008, 11:07:42 pm »
hey, marc

i send all my bows in abs sewer pipe.