Hi,
this is a 62lb draw @29inches, 73inches = 185cm nock to nock, ash board bow.
1-1/2inches = 4cm wide at handle.
4inch = 10cm long handle area.
Tapering of the limbs start at the remaining 17 inches(43cm). The limbs taper down to 3/8 inches wide.(10mm)
Bow was heat treated and reflexed to 2''.
I tillered this bow only using a mirror, pretty happy about the end result!
It was quick to make and very simple. A bow capable of taking down a deer, made in a matter or hours!(except for the waiting of moisturizing after heat treatment)
This is going to be my new target practise bow for this summer.
![](https://i.imgur.com/NakEc3L.jpg)
![](https://i.imgur.com/cgel9Ok.jpg)
![](https://i.imgur.com/8XdMAWb.jpg)
![](https://i.imgur.com/IKPAn2I.jpg)
![](https://i.imgur.com/gEil3EB.jpg)
![](https://i.imgur.com/viyq3gF.jpg)
![](https://i.imgur.com/lSuzben.jpg)
![](https://i.imgur.com/UPDxbu2.jpg)
![](https://i.imgur.com/7DlooJ3.jpg)