« previous next »
Pages: [1]

Author Topic: wagon wheel tire  (Read 4591 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
wagon wheel tire
« on: June 30, 2019, 10:41:09 am »
I have an old wood wagon wheel the most of the wood has rotted away. Does anyone know if the tire(metal) or the metal bands that hold the hub together would be good forging blades.   (f)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: wagon wheel tire
« Reply #1 on: June 30, 2019, 11:35:26 am »
Good question Pat.  I found a wagon wheel in the middle of our woods years ago.  You can see where it was forge welded together. 
Logged
I started out with nothin' and I still got most of it left

Offline dylanholderman

  • Member
  • Posts: 787
Re: wagon wheel tire
« Reply #2 on: June 30, 2019, 06:16:20 pm »
not good blade steel but it is good furniture steel.
actual old wagon wheels are made from wrought iron( even lower carbon then mild steel) but because of how it was manufactured the impurity's in it make for some interesting patterns that make it good for hilt parts or forge welding to a high carbon steel for the edge.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wagon wheel tire
« Reply #3 on: June 30, 2019, 08:12:12 pm »
Maybe I'll make a gong out of it. How about the bands that hold the hub together? Different function, different material?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: wagon wheel tire
« Reply #4 on: June 30, 2019, 09:44:23 pm »
I would think the cooperage (barrel) bands would be a higher grade is steel, but I am not a mettallurgist or a blacksmith.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline bubby

  • Member
  • Posts: 11,054
Re: wagon wheel tire
« Reply #5 on: July 04, 2019, 10:10:19 am »
If it's wrought iron I would like to get my hands on a little Pat
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wagon wheel tire
« Reply #6 on: July 04, 2019, 01:57:30 pm »
How do I know if it is wrought iron?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ssgtchad

  • Member
  • Posts: 338
Re: wagon wheel tire
« Reply #7 on: July 22, 2019, 03:34:41 am »
Take a small sample heat it to critical, quench, it then slap it on your anvil, If it shatters it's probably good steel to forge a blade. I'd think that the road wheel would be made from a good quality steel, seeing that it has to hold up to alot of friction,  bumps etc. I dont think wrought iron would hold up.
Logged
Always learning something new.

Offline PaulN/KS

  • Member
  • Posts: 1,389
Re: wagon wheel tire
« Reply #8 on: July 22, 2019, 06:22:02 pm »
I've got an old bent up one that I found stuck in the rocks by a pasture. It rings like a bell when ya whack it...
Never have done anything with it except move it out of the way a bunch a times.  ::)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wagon wheel tire
« Reply #9 on: July 22, 2019, 06:50:43 pm »
I have no way of cutting or heating to any significant temperature. Maybe I make a gong out of it.  :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: wagon wheel tire
« Reply #10 on: August 01, 2019, 09:55:55 am »
i've seen some strong, sharp trade points made from the wheel band.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?
Pages: [1]
« previous next »