Just wanted to put this out there for anyone who may be looking to buy a new band saw . few months back I finally bought my first big boy saw . had plenty of saws with only a 6 inch resaw capacity and every one of them I just always felt never had what I needed . was looking at the grizzly saws but it bothered me not be able to see it in person without traveling to Missouri . I ended up getting a rikon 10326. it's got a one and three quarter horse with a 13 and a half resaw capacity . all the guides are tool less adjustments and extremely user-friendly. I've resawed a 12 inch piece of Oak with no problem. today was the first time I pushed it hard cutting up all my questionable wood to see what's good . Biggest thing I ran today is a 6 inch piece of Osage and with a two teeth per inch three-quarter inch Rip blade it did not struggle one bit . I also wanted a saw with a dual voltage motor because I have access to 220 in my shop . have yet to change it over still running in 110. More than ok in 110 if thats all you have. figured I'd just give you guys a little review in case any of you are looking
