« previous next »
Pages: 1 [2]

Author Topic: how i achieve a Hamon  (Read 10378 times)

0 Members and 3 Guests are viewing this topic.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,207
  • if you have to ask you wouldn't understand ,Tenn.
Re: how i achieve a Hamon
« Reply #15 on: January 17, 2020, 10:27:57 am »
Try use this all the time, got CRS 😉
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: how i achieve a Hamon
« Reply #16 on: January 17, 2020, 12:02:22 pm »
Nice "etch along", looks very good
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline WhistlingBadger

  • Member
  • Posts: 1,787
  • Future Expert
Re: how i achieve a Hamon
« Reply #17 on: January 17, 2020, 12:30:19 pm »
That's beautiful work, Kevin.  Thanks for sharing it.  So, the coating protects from the heat, making the upper part just a tiny bit softer than the lower, correct?  Is this just a visual effect, or does it make the knife cut better?
« Last Edit: January 17, 2020, 12:35:05 pm by WhistlingBadger »
Logged
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline KHalverson

  • Member
  • Posts: 758
Re: how i achieve a Hamon
« Reply #18 on: January 17, 2020, 01:08:57 pm »
Quote from: WhistlingBadger on January 17, 2020, 12:30:19 pm
That's beautiful work, Kevin.  Thanks for sharing it.  So, the coating protects from the heat, making the upper part just a tiny bit softer than the lower, correct?  Is this just a visual effect, or does it make the knife cut better?

it looks cool and also serves to make a tougher blade .
a blade that may bend just a touch versus snapping in two if used as a pry bar.
adding clay isn't the only way to do it.
you can edge quench or blue back a full quenched blade to achieve the same results.
just doesn't add the bling factor.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,927
Re: how i achieve a Hamon
« Reply #19 on: January 17, 2020, 06:17:03 pm »
Is there any reason to not use masking tape to get a straight edge to the hamon? Or some of the specialty masking tapes that have decorative edges for something fancy?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline KHalverson

  • Member
  • Posts: 758
Re: how i achieve a Hamon
« Reply #20 on: January 17, 2020, 06:38:42 pm »
Quote from: JW_Halverson on January 17, 2020, 06:17:03 pm
Is there any reason to not use masking tape to get a straight edge to the hamon? Or some of the specialty masking tapes that have decorative edges for something fancy?

no reason you couldn't use tape to help keep a straight line with the clay.
id be more apt to use a rosebud torch and just heat the edge u as far as I wanted the quench it.
as far as using a fancy stenciled tape I highly doubt that youd be able to emulate the tape in the hamon.
I kinda has a mind of its own.
I never get exactly the pattern I put the clay on in.
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: how i achieve a Hamon
« Reply #21 on: January 18, 2020, 02:18:55 pm »
Where do you buy your cement at?
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: how i achieve a Hamon
« Reply #22 on: January 18, 2020, 03:50:56 pm »
rob
most any of the big box lumber stores carry it.
also tractor supply ,ace hardware, family farm and home.
about any place that sells wood stove supplies will have it.
you want cement that is rated for 1500 f minimum.
Kevin
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: how i achieve a Hamon
« Reply #23 on: January 18, 2020, 06:06:26 pm »
Kevin where do you get your cement at?
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: how i achieve a Hamon
« Reply #24 on: January 19, 2020, 04:07:09 am »
Quote from: Trapper Rob on January 18, 2020, 06:06:26 pm
Kevin where do you get your cement at?

this last tub came from Menards.
Logged
Pages: 1 [2]
« previous next »