« previous next »
Pages: [1] 2

Author Topic: Wood Identification  (Read 3310 times)

0 Members and 1 Guest are viewing this topic.

Offline IrishJay

  • Member
  • Posts: 442
Wood Identification
« on: January 05, 2019, 03:40:01 pm »
I cut this tree about a month ago, from the bark I thought it was ash, but once I felled it I saw a slight purple tint to the heartwood and thought it was possibly boxelder. I finally split it today and after sitting the purple tint is gone and the heartwood is a very distinct dark brown. At this point I have no idea what I have. It did split nicely. 






Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Badger

  • Member
  • Posts: 8,124
Re: Wood Identification
« Reply #1 on: January 05, 2019, 04:29:22 pm »
  Looks like ash to me, but it could be any number of woods I am not familiar with.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #2 on: January 05, 2019, 06:10:05 pm »
Couple close ups of the pith. It's chambered, making me think it might be black walnut. Still not sure.



Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #3 on: January 05, 2019, 06:26:59 pm »
Upon further research, green ash has a chambered pith to, so I guess that doesn't help narrow it down any.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline M2A

  • Member
  • Posts: 878
Re: Wood Identification
« Reply #4 on: January 05, 2019, 06:32:22 pm »
I’m thinking black walnut by how it looks. Maybe take a few scrapes with a rasp or card scraper. Walnut has a distinct smell.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #5 on: January 05, 2019, 06:42:29 pm »
I'll check the smell here shortly. Question, if it is black walnut do I work with the sap wood or do I chase a ring down to heartwood?
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Swampman

  • Member
  • Posts: 1,046
  • Primitive Archer subscription number PM109299
Re: Wood Identification
« Reply #6 on: January 05, 2019, 06:48:06 pm »
The sapwood works well for black walnut.  I made a few with sapwood right under the bark and had good luck. 
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #7 on: January 05, 2019, 07:16:01 pm »
Best close up of end grain pores I could get with my phone, definitely doesn't have the distinctive ring-porous pattern of ash.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wood Identification
« Reply #8 on: January 05, 2019, 07:52:26 pm »
It is black walnut.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #9 on: January 05, 2019, 07:54:21 pm »
Next question, should I split the halves into quarters and try to get 4 staves or saw cut a slice out of each half just a little wider than the heartwood?
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wood Identification
« Reply #10 on: January 05, 2019, 09:30:31 pm »
You will need 1 3/4" to 2" wide limbs. I don't know how wide the halves are. You won't get much heartwood in the bow, maybe a little in the handle. You want to use the wood right under the bark.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IrishJay

  • Member
  • Posts: 442
Re: Wood Identification
« Reply #11 on: January 05, 2019, 09:39:25 pm »
I tried to split on of the halves into quarters and the split did not run as straight as the initial one did. I ended up with a skinny piece of scrap and a stave that can be cleaned up with saw. I'm going to try to split the other half tomorrow, hopefully it goes better. But at least I have one good one so far.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Wood Identification
« Reply #12 on: January 06, 2019, 10:16:20 am »
How skinny? Ive made a couple of really nice bows from run away splits, a good bow only needs very little timber and a split can just save you a lot of roughing out 😁
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Wood Identification
« Reply #13 on: January 06, 2019, 10:20:52 am »
Or if 40" of it is good it will make a billet :)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wood Identification
« Reply #14 on: January 06, 2019, 10:25:04 am »
If the first one didn't split as you wanted it to then saw the other one instead of splitting.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1] 2
« previous next »