Author Topic: takedowns (Read 10691 times)

bowmunky13 · « **on:** April 02, 2008, 12:30:12 pm »

hey all i have been reading about the backpack bow challenge.. was wondering if anyone had a set of blueprints that i can borrow or maybe point me to a build along? i am trying for a two piece takedown.... the style doesnt matter.. i just need something i can put in my little car that i can take to the range on post during lunch

Pappy · « **Reply #1 on:** April 02, 2008, 01:05:03 pm »

I plan to have a little follow along,not a real build along next week sometime ,as soon as I get it all togeather.I got the take down sleeve from 3 rivers.It is fairly simple to do and works like a champ.
As far as building one I don't know the fit on this one is really snug,If you are a mechanist you could
probably do it.

Pappy

bowmunky13 · « **Reply #2 on:** April 02, 2008, 01:18:31 pm »

thanks pappy.. i am rackin my brain trying to figure it out...

jeduffey · « **Reply #3 on:** April 02, 2008, 04:15:02 pm »

You could get a BowBolt.

El Destructo · « **Reply #4 on:** April 02, 2008, 04:25:31 pm »

Quote from: jeduffey on April 02, 2008, 04:15:02 pm

You could get a BowBolt.

They aint Cheap....but they look sturdy enough....break down like My Remington Rifle does!!

bowmunky13 · « **Reply #5 on:** April 02, 2008, 10:59:44 pm »

where might i acquire this bow bolt?

Justin Snyder · « **Reply #6 on:** April 03, 2008, 11:01:44 am »

Try one of the suppliers listed in the advertisers section at the bottom of the main forum page. 3 Rivers carries several takedown options. http://3riversarchery.resultspage.com/search?w=takedown

Pappy · « **Reply #7 on:** April 03, 2008, 11:22:53 am »

There are some pictures of the take down system justin is talking about on the build along thread
under take down.It's not the bolt it's the sleeve.I have heard of the bolt or hinge but never seen
one.

Pappy

Justin Snyder · « **Reply #8 on:** April 03, 2008, 11:27:05 am »

Pappy, I think TBB 1 has a picture of both a sleve and a bolt. Justin

Pappy · « **Reply #9 on:** April 03, 2008, 11:29:32 am »

Thanks,hadn't looked at it in a long time,I will check it out.

Pappy

bowmunky13 · « **Reply #10 on:** April 03, 2008, 02:37:10 pm »

thanx guys.. once again i have to say i am glad to have joined this family

Justin Snyder · « **Reply #11 on:** April 03, 2008, 04:09:03 pm »

I'm going to get to the bottom of a discussion we have had several times about takedown sleeves. We have wondered about the size to use if you have big or little hands. The small takedown sleeve and the large takedown sleeve are the same width. The small takedown sleeve is mostly square while the large has a rounded belly side which I think makes it more comfortable. It is 1/4" deeper from belly to back, but it is only the rounding that causes this. Justin

akila · « **Reply #12 on:** April 03, 2008, 08:58:45 pm »

HI...from whatt material is this sleeves made of..??

Justin Snyder · « **Reply #13 on:** April 03, 2008, 09:01:45 pm »

Steele sleeve, brass insert

akila · « **Reply #14 on:** April 03, 2008, 09:45:31 pm »

Aha...thks..it looks to me like its coper...

Primitive Archer