Author Topic: Plastic nocks (Read 3114 times)

Matt1986 · « **on:** October 01, 2018, 06:31:42 am »

Will 5/16 nocks work on 11/32 shafts

Pat B · « **Reply #1 on:** October 01, 2018, 07:55:55 am »

They will but it might net be safe. Just a guess though.

Hawkdancer · « **Reply #2 on:** October 01, 2018, 11:01:48 am »

I would say check the fit with lampblack, and see what kind of contact you are getting. If the taper is the same, you should get a good fit
Hawkdancer

Matt1986 · « **Reply #3 on:** October 01, 2018, 01:19:34 pm »

Thanks everyone. The taper fits good. Ther is a little taper showing were the nock is smaller in diameter but it it making full contact with the nock

JEB · « **Reply #4 on:** October 01, 2018, 06:48:01 pm »

They will. Some like a smaller nock. If you need some 11/32 I have lots of them and would be willing to give you some. Just need an address.

Matt1986 · « **Reply #5 on:** October 05, 2018, 09:31:26 pm »

Thanks a lot bud

JEB · « **Reply #6 on:** October 06, 2018, 01:13:13 pm »

You want the snap on type or the speed nock and any color choice (if I have the color)

Matt1986 · « **Reply #7 on:** October 06, 2018, 06:46:04 pm »

Snapon. Any color will do

Matt1986 · « **Reply #8 on:** October 07, 2018, 08:59:53 pm »

Pm sent. Jeb. Thanks alot

JEB · « **Reply #9 on:** October 19, 2018, 03:45:06 pm »

Did the nocks arrive?

Primitive Archer

Author Topic: Plastic nocks (Read 3114 times)

Matt1986

Plastic nocks

Pat B

Re: Plastic nocks

Hawkdancer

Re: Plastic nocks

Matt1986

Re: Plastic nocks

JEB

Re: Plastic nocks

Matt1986

Re: Plastic nocks

JEB

Re: Plastic nocks

Matt1986

Re: Plastic nocks

Matt1986

Re: Plastic nocks

JEB

Re: Plastic nocks