« previous next »
Pages: [1]

Author Topic: holly longbow  (Read 1742 times)

0 Members and 1 Guest are viewing this topic.

Offline lleroy

  • Member
  • Posts: 54
holly longbow
« on: August 25, 2018, 04:10:35 am »
Hi folks,

I'd like to make a holly (ilex aquifolium)  longbow. I'd be aiming for about 67" long and #40 @28".
Could a stave of about 5cm diameter be sufficient for that?
Would it be possible to "decrown" to make the front flatter?
I would hope that holly would not have too much problems of 'lifting a splinter'...

Looking forward to suggestions or thoughts.
« Last Edit: August 26, 2018, 04:04:24 am by lleroy »
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: holly longbow
« Reply #1 on: August 25, 2018, 07:29:10 am »
Never worked with Holly before, but I suspect that decrowning isn't a great idea. If I remember correctly, the SG is relatively low, so you probably want to leave it fairly wide. Hopefully someone that knows Holly better will chime in.

Best of luck!
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: holly longbow
« Reply #2 on: August 26, 2018, 02:14:26 am »
I've made som holly bows in the past, all flatbows - no longbows. Asssuming you meant ELB when saying longow, I would go with 60 - 64" long, no decrowning, 5 cm is sufficient.
Logged
Simon
Bavaria, Germany

Offline stuckinthemud

  • Member
  • Posts: 2,300
    • avenue woodcarving
Re: holly longbow
« Reply #3 on: August 26, 2018, 02:34:47 pm »
I made a holly D-bow, nicest bow I've built to-date, would have been called an ELB if it had been 6 inches longer.  Rectangular profile and leave the crown alone would be my advice, and gently toast the belly, that makes a big difference but don't over-do it.
Logged
Pages: [1]
« previous next »