« previous next »
Pages: [1]

Author Topic: where's the poundage  (Read 4473 times)

0 Members and 1 Guest are viewing this topic.

Offline 0ri9ine11

  • Member
  • Posts: 19
where's the poundage
« on: May 30, 2018, 11:59:25 am »

So I am currently building a horsebow out of Rattan Manau. I don't know how popular that idea is around here, but over at fletchers corner it got quiet famous because its such a nice "light version" of an actual hornbow.
I'm planning to face it with american walnut, but tiller it as good as possible beforehand. I scraped the Manau down to about 13-15mm and strung that whole thing to braceheight. I gave it a careful littl pull and had to notice it was extremely easy to pull. Even though I am going to face it I'd still like it to be a little strong in of its own.
So I took the heat gun and roasted the belly. (at this time around 2-3 times on both limbs) After every heat treatment I noticed the limbs got quiet a lot harder to bend and it was noticable harder to string as well.
But as soon as it was at braceheight... boom poundage gone! Feels like 5 pounds. Now I have never pulled a recurved bow or one with siyahs before. Anybody got an idea? ???
« Last Edit: May 30, 2018, 12:34:29 pm by 0ri9ine11 »
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: where's the poundage
« Reply #1 on: May 30, 2018, 12:27:08 pm »
Because this is not a horn bow I'm going to move this to "Bows" for better visibility.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline 0ri9ine11

  • Member
  • Posts: 19
Re: where's the poundage
« Reply #2 on: May 30, 2018, 12:35:00 pm »
aight. sorry I wasn't sure :-[
Logged

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: where's the poundage
« Reply #3 on: June 03, 2018, 07:31:46 am »
Are you sure nothing broke? Like a fret?
Logged

Offline 0ri9ine11

  • Member
  • Posts: 19
Re: where's the poundage
« Reply #4 on: June 03, 2018, 09:36:09 am »
jup everythings normal
Logged

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: where's the poundage
« Reply #5 on: June 03, 2018, 10:28:33 am »
Wait, so you got the string on and it lost pundage?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: where's the poundage
« Reply #6 on: June 03, 2018, 10:38:05 am »
When you say "face" it with Walnut do you mean "back" it with walnut? If so a backing will increase the draw weight quite a bit, more than you expect. I've never used Walnut for a backing so I have no idea how well it will work.
Logged

Offline 0ri9ine11

  • Member
  • Posts: 19
Re: where's the poundage
« Reply #7 on: June 03, 2018, 12:59:59 pm »
no I mean walnut on the belly. Manau is not something that can make use of a backing, since its only problem is compression and a lot of set
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: where's the poundage
« Reply #8 on: June 03, 2018, 02:14:39 pm »
A belly lam will probably still increase the draw weight but I'm venturing into guesswork now ;D ;D
Logged

Offline 0ri9ine11

  • Member
  • Posts: 19
Re: where's the poundage
« Reply #9 on: June 04, 2018, 09:56:41 am »
@Ryan jacobs
I mean at least it feels like it. or more specifically: the pundage when strung didn't increase while it got harder and harder to string and bend by hand :o
Logged

Offline Ryan Jacob

  • Member
  • Posts: 427
Re: where's the poundage
« Reply #10 on: June 07, 2018, 09:32:57 am »
Well, it really doesn’t matter if you’re adding a belly lam, that’ll add a couple pounds.
Logged
Pages: [1]
« previous next »