« previous next »
Pages: [1] 2

Author Topic: 65# Black Locust  (Read 4157 times)

0 Members and 1 Guest are viewing this topic.

Offline M2A

  • Member
  • Posts: 878
65# Black Locust
« on: January 05, 2018, 12:36:06 am »
Hi Folks,

A few weeks ago I finished a black locust bow After 300 shots and what I thought was a good tiller it was 65 lbs at 29 inches. A little higher that I would have liked but was so pleased that it looked even I decided to leave it alone and work myself towards a heavier draw weight. This is 1st bow I have made that is over 30 or so lbs. Have about 1000 shots out of it so far and still need to get about an inch more on draw but getting closer. There is a bit of a propeller twist but not much so I left it go. I did use heat gun some to get string to track on handle and cheated string nocks over to get the rest. It developed about 3 inches of set during tillering but has remained the same since and I am happy to say there are no crystals in limbs. It does not stack,  gains between 2-3 lbs per inch on draw.

Never been part of any forum before but decided that when this bow was finished I would join here...so with the help of my son I was able to get this far in regards to online stuff. When looking online for my bow questions it seemed that they had already been answered here, if not several times over. So I'd like to say thank you for helping me with all the information through the questions asked and the answers given, even if it was indirect to me. So many awesome looking bows I have seen from the folks here. I look forward to looking to see the next one each day 

So below I hope pictures will work
I think pictures turned out not too bad for 1st attempt, was not thinking with full draw picture and don't have bow vertical.  if you see something that does not look good let me know so I don't make that mistake again.

Thanks,
Mike   


70" ntn
4" stiff handle with 2 " fades
2 " limb width at fades
.5 " at tips
antler tip overlays         
65# @ 29"(62"@28")

[url=https://www.flickr.com/photos/158435722@N02/]
[url=https://flic.kr/p/JeynrD] [url=https://www.flickr.com/photos/158435722@N02/]
[url=https://flic.kr/p/21P1hEx] [url=https://www.flickr.com/photos/158435722@N02/]
[url=https://flic.kr/p/21NZPsM] [url=https://www.flickr.com/photos/158435722@N02/]
[url=https://flic.kr/p/21P1ixp] [url=https://www.flickr.com/photos/158435722@N02/]

Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,893
  • if you have to ask you wouldn't understand ,Tenn.
Re: 65# Black Locust
« Reply #1 on: January 05, 2018, 07:03:35 am »
Beautiful color, looks like a shooter to me. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Bob W.

  • Member
  • Posts: 288
Re: 65# Black Locust
« Reply #2 on: January 05, 2018, 07:14:35 am »
Nice Bow sir,  happy shooting!
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: 65# Black Locust
« Reply #3 on: January 05, 2018, 07:18:57 am »
Welcome to the forum and congrats on that nice looking bow!  (-S
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: 65# Black Locust
« Reply #4 on: January 05, 2018, 07:30:50 am »
I agree.Looks like a shooter to me and in the beginning that's what counts.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: 65# Black Locust
« Reply #5 on: January 05, 2018, 07:44:03 am »
Locust can be a challenge. Nice work! Welcome to PA forum.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline bjrogg

  • Member
  • Posts: 10,873
  • Cedar Pond
Re: 65# Black Locust
« Reply #6 on: January 05, 2018, 11:11:01 am »
Welcome to PA Mike. Glad to see you out here in the light of day. You appear to have learned pretty well by just searching in the background. I'm sure you'll be turning out some really nice stuff in the future. That looks like a nicely tilered bow and a good shooter. Sure is a great feeling isn't it. I'm thinking there's a bunch of guys on here that really don't do much on computer other than come to this site. I know I'm one.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Jim Davis

  • Member
  • Posts: 1,337
  • Reparrows
    • Reparrows
Re: 65# Black Locust
« Reply #7 on: January 05, 2018, 11:50:23 am »
I agree with all the above. Very good work.

Three inches is a little beyond what I like to get in string follow. I would guess the draw weight is a little beyond what locust can handle at a 2" width. When I had locust to work with, I usually went  2-1/4" wide at the fades and only tried for the mid 40s for draw weight.
Logged
Jim Davis

Kentucky--formerly Maine

Offline JW_Halverson

  • Member
  • Posts: 11,881
Re: 65# Black Locust
« Reply #8 on: January 05, 2018, 12:24:34 pm »
You can brag a little on this one! 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Hawkdancer

  • Member
  • Posts: 5,031
Re: 65# Black Locust
« Reply #9 on: January 05, 2018, 01:28:37 pm »
Congratulations!  Looks good!  Welcome aboard.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline M2A

  • Member
  • Posts: 878
Re: 65# Black Locust
« Reply #10 on: January 05, 2018, 04:53:15 pm »
Thank you guys for the comments everyone!

Yes Bjrogg It's a good feeling when it all works out :)

I agree Jim Davis. In hindsight I should have lightened it up to prevent as much set....I was watching the weight very carefully, somewhere between long string and full brace I lost my mind and was only looking at the bend  :). I will pay more attention to that on the next one, as I have several more staves from the same log. I will remember your advice.

Thanks,
Mike           
Logged

Offline Selfbowman

  • Member
  • Posts: 2,964
Re: 65# Black Locust
« Reply #11 on: January 05, 2018, 07:12:52 pm »
Congrats on the bow. Looks good . Arvin
Logged
Well I'll say!!  Osage is king!!

Offline Yard Dog

  • Member
  • Posts: 64
Re: 65# Black Locust
« Reply #12 on: January 05, 2018, 08:19:33 pm »
Nice job !!!!
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: 65# Black Locust
« Reply #13 on: January 06, 2018, 11:10:00 am »
Nice one!
Welcome here
Logged
Simon
Bavaria, Germany

Offline Morgan

  • Member
  • Posts: 1,028
Re: 65# Black Locust
« Reply #14 on: January 06, 2018, 09:52:39 pm »
Quote from: M2A on January 05, 2018, 04:53:15 pm
Thank you guys for the comments everyone!

Yes Bjrogg It's a good feeling when it all works out :)

I agree Jim Davis. In hindsight I should have lightened it up to prevent as much set....I was watching the weight very carefully, somewhere between long string and full brace I lost my mind and was only looking at the bend  :). I will pay more attention to that on the next one, as I have several more staves from the same log. I will remember your advice.

Thanks,
Mike         

I don’t believe that anyone who makes things by hand, with raw materials, looks at their finished project and thinks it is perfect. There will always be a flaw that maybe only you can see, or something that you would like to improve on. Other craftsmen who are experienced will also see these things.
You are doing that now, and it is a good thing, but you should also be tickled to death with what you have done with that stick of wood!  Well done! You are off to one heck of a start and  I look forward to seeing more.
Logged
Pages: [1] 2
« previous next »