Author Topic: Pottery Kiln to Flint Kiln  (Read 2393 times)

0 Members and 1 Guest are viewing this topic.

Dfisher12

  • Guest
Pottery Kiln to Flint Kiln
« on: September 02, 2017, 09:42:52 pm »
Hi, I am new to this forum but joined because I noticed some older topics related to making your own kiln. I am currently beginning the project of converting a pottery kiln into one for heat treating rock. I have read a bit on the robert-shaw #55-135 method and making elements out of .035 mig wire. I was curious if anyone had pictures of their own that they made in this fashion. It would really help my project to get a visual or even some video on this process. I saw there used to be some pictures in an old post from 2009 but they seem to be long gone.

Dale

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Pottery Kiln to Flint Kiln
« Reply #1 on: September 04, 2017, 06:24:53 am »
Hi Dale welcome to PA, I'm afraid I can't help with your question. I'm thinking some of the guys that can are probably at Flint Ridge knap-in this weekend. Maybe they will chime in here later in the week.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Pottery Kiln to Flint Kiln
« Reply #2 on: September 04, 2017, 12:11:40 pm »
Dale,
Welcome to PA!  These folks have a wealth of knowledge to share and are willing to do it.  Of course, you may also get arid or two, but always good information! 
Hawkdancer
Life is far too serious to be taken that way!
Jerry