Morning all I have a 68 in. 1 1/2 wide lever bow with 8 1/2 levers Im working on that Im trying to get right, the one limb has hollows at different areas the center ones per recommendation to leave slightly thicker during tiller but the outer edge is the one that concerns me the hollow rises to a sharp edge on the outer limb Im wondering if I should completly round over so its flush with the botom of the hollow ? There is 8/1000s difference in thickness I was intending on making this a self bow but wondering with the stress of this design if I shouldnt back it ? The bow will be pulled to 30 in. Other then those issues the hedge is fairly clean !
