« previous next »
Pages: [1]

Author Topic: Hickory "Twig" for Belegarth  (Read 842 times)

0 Members and 1 Guest are viewing this topic.

Offline Academonicon

  • Member
  • Posts: 85
Hickory "Twig" for Belegarth
« on: April 09, 2017, 12:01:48 pm »
Finally got around to making the bow I'll be using to participate in the "Belegarth Medieval Combat Society."  Per specifications, the bow couldn't be more than 35# at 28", and considering that, the final product has some nice zip to it.  The tiller wound up a little off, with the upper limb a little stiff, but I like the way it shoots, so I'm not complaining too much.  Time to make some padded arrows!

Hickory flatbow, 33# @ 28", tapers from about 1 1/2" at the handle to 3/8" or so at the tip; slight static recurve; hemp cord wrapping on the handle.  Nothing fancy.






Logged

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: Hickory "Twig" for Belegarth
« Reply #1 on: April 09, 2017, 12:54:26 pm »
Nice looking bow!
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Hickory "Twig" for Belegarth
« Reply #2 on: April 09, 2017, 01:16:53 pm »
Nice looking bow. Too bad you can't flip it so the stronger limb is on the bottom.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Hickory "Twig" for Belegarth
« Reply #3 on: April 09, 2017, 01:53:20 pm »
 Nice hickory stick congrats !
Logged
If you fear failure you will never Try !
Pages: [1]
« previous next »