« previous next »
Pages: 1 [2]

Author Topic: 3 Under Tiller question  (Read 3363 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Re: 3 Under Tiller question
« Reply #15 on: January 30, 2017, 12:04:42 pm »
Quote from: mwosborn on January 29, 2017, 08:15:51 pm
Looks like the inner third on both limbs need to work a little bit.  Limb A appears to be weaker and really bending in the outer 1/2.  Got an unstrung pic?

+2 on that one, also what Pappy mentioned  "If I know someone is going to shoot 3 under I make the bottom a bit stiffer that I normally would. :) "
 Pappy
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline justsomedude

  • Member
  • Posts: 130
Re: 3 Under Tiller question
« Reply #16 on: February 02, 2017, 02:03:17 pm »
I refined it with sanding and I'm calling this one 'good' before I ruin it. There is a hump in the top limb but it is set that way and I'm right at my target of 45#@28" right now.
Just need to thin the grip out some more. I'm gripping low in the photo which is loading the bottom limb more in addition to 3 under

Thanks for the help. Planning build #2 now
 
Logged
Pages: 1 [2]
« previous next »