Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
FF string thoughts
« previous
next »
Print
Pages: [
1
]
Author
Topic: FF string thoughts (Read 1716 times)
0 Members and 1 Guest are viewing this topic.
Stick Bender
Member
Posts: 2,003
FF string thoughts
«
on:
January 29, 2017, 07:28:29 am »
Hi Fellas I just finished up this squiggly stick of osage and going to shoot it in at the range today I want to make a FF string for it but never used FF before I have a roll of the 3 rivers kind this bow is pulling 47 lb with self knocks so Im thinking 10 strand padded with b50 Im planing on Tying on the botom knock with a hitch knot I herd FF can be tuff to get tied with a knot, any tips or does the b50 padding help with the knot?
Logged
If you fear failure you will never Try !
BowEd
Member
Posts: 9,390
BowEd
Re: FF string thoughts
«
Reply #1 on:
January 29, 2017, 10:20:03 am »
Yes it can be a little more slick.Wax it up good.On a bowyers knot for a tillering string I just go around a couple more times through the loop.It will usually bind and hold then.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed
simson
Member
Posts: 2,310
stonehill-primitive-bows
Re: FF string thoughts
«
Reply #2 on:
January 30, 2017, 03:22:23 pm »
1. FF is a summary of a lot of different characteristics and different diameters
2. Look here:
http://primitive-bows.com/about-strings/
3. I think Carson has posted some time ago a sketch of variety of a bowyers knot suitable for ff
Logged
Simon
Bavaria, Germany
dragonman
Member
Posts: 1,142
Re: FF string thoughts
«
Reply #3 on:
January 30, 2017, 03:30:09 pm »
i tried making a FF flemish twist adjustable ended string with no luck, it kept slipping....I did everything to stop it and it did almost stop it slipping, but it still slowly lengthened, so I gave up and made a double loop
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......
BowEd
Member
Posts: 9,390
BowEd
Re: FF string thoughts
«
Reply #4 on:
January 30, 2017, 08:06:36 pm »
That's my overall solution too with fast flight is to make a double loop string.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed
loon
Member
Posts: 1,307
Re: FF string thoughts
«
Reply #5 on:
January 30, 2017, 08:17:53 pm »
http://www.primitivearcher.com/smf/index.php?topic=49876.0
note - fast flight is ultra high molecular weight polyethylene, not kevlar. kevlar tends to break after a while and is not commonly used these days.
There's other variations too, I think. Could maybe start it with a figure of 8.
Nice stick. Hope it works out. padding with dacron should help too...
«
Last Edit: January 30, 2017, 08:24:11 pm by loon
»
Logged
BowEd
Member
Posts: 9,390
BowEd
Re: FF string thoughts
«
Reply #6 on:
January 30, 2017, 08:48:32 pm »
I see Loon.Going around the main string line twice instead of once should help.Other wise it's the same way I do it.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed
make-n-break
Member
Posts: 378
Re: FF string thoughts
«
Reply #7 on:
January 30, 2017, 08:58:33 pm »
I also go around the main string twice before finishing the knot, like Beadman. It prevents slippage for me too.
Logged
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1
osage outlaw
Member
Posts: 11,962
Re: FF string thoughts
«
Reply #8 on:
January 30, 2017, 09:01:31 pm »
I only make double loop strings. I got tired of fighting the knot. Once I started using a string jig and figured out the end lengths and amount of twists I can make a double loop string in a few minutes. Even my tillering string is a double loop.
Logged
I started out with nothin' and I still got most of it left
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
FF string thoughts