Author Topic: Setback  (Read 2930 times)

0 Members and 1 Guest are viewing this topic.

Offline clintw864

  • Member
  • Posts: 19
Setback
« on: March 08, 2008, 01:07:13 pm »
I have a red mulberry stave 60" with a 2 1/4 setback that is pretty even the entire length. Is this too much to work with or should I try and take a little out?  Thanks, Clint
Clint Wilson

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Setback
« Reply #1 on: March 08, 2008, 01:15:11 pm »
That's about ideal. You should wind up with either a straight bow or a little reflex after tillering.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Setback
« Reply #2 on: March 08, 2008, 05:16:15 pm »
Like Steve ( Hillbilly ) said. Even 3" would be ok....bob

Offline clintw864

  • Member
  • Posts: 19
Re: Setback
« Reply #3 on: March 08, 2008, 06:09:04 pm »
Thanks guys. I'll have at it.
Clint Wilson

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Setback
« Reply #4 on: March 09, 2008, 01:53:11 am »
Be careful as you take the limbs to and past dead flat profile. Its easy to remove too much wood because of the extra stress put on the stave with backset.    Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC