« previous next »
Pages: [1] 2 3

Author Topic: stoned elm  (Read 10860 times)

0 Members and 1 Guest are viewing this topic.

jamie

  • Guest
stoned elm
« on: March 04, 2008, 09:34:59 am »
heres another i finished up ths morning. elm again. really like this stuff. my favorite of the white woods. 64" ntn. 50@26. 1 1/4" wide 1/2" or so nocks. done with stone tools. bow had 1 1/2" of deflex in one tip and and 2 1/2" in the other so i steamed and bent the tips. not primitive , did it on the stove. bow has taken about a 1/2" of set since finishing. recovers though after being unstrung for the night. each end of the bow had a kink in it that gave the bow a lot of the original deflex (pics below). still some cambium on it . every now and then a piece cracks off and scares the bejesus out of me. i went with narrow tips on this one rather than the typical wide tips found on most woodland bows. found it didnt take that much more time to reduce em. hardest part of this bow was removing the bark, or actually the cambium. no finish yet. linen string. i broke the milkweed one i had made after 6 shots.











Logged

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: stoned elm
« Reply #1 on: March 04, 2008, 09:37:54 am »
Good looking bow Jamie, tiller looks good. I'd bet it's a good shooter! :)
Logged
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: stoned elm
« Reply #2 on: March 04, 2008, 09:41:34 am »
Very nice jamie ,looks great,lots of work I know but you do it well.Tiller looks good to me. :)
    Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: stoned elm
« Reply #3 on: March 04, 2008, 09:53:06 am »
Ya very cool bro'. Agree with ya cambium is tough with the stones. For that matter steel when its dry. Lookee like a good hunter and aint that whats it about ? ;)...........bob
Logged

Offline DanaM

  • Member
  • Posts: 9,211
Re: stoned elm
« Reply #4 on: March 04, 2008, 10:25:36 am »
Love it jamie, the full draw pic is good also. Now go put a shirt on this a family site :o
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

jamie

  • Guest
Re: stoned elm
« Reply #5 on: March 04, 2008, 10:32:00 am »
thanks guys. i love these bows theres something about them that just does my soul good.

dana be happy i put my pants on ;D
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: stoned elm
« Reply #6 on: March 04, 2008, 10:52:46 am »
Looks good, looks like Elm has some pretty grain in it. I can't tell it wasn't worked with all the latest steel tools ;D..
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Gordon

  • Member
  • Posts: 3,299
Re: stoned elm
« Reply #7 on: March 04, 2008, 11:20:59 am »
I don't think you could have done a better job with modern tools. That is impressive.
Logged
Gordon

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: stoned elm
« Reply #8 on: March 04, 2008, 11:51:14 am »

WOW!!!
Logged
Frank from Germany...

Offline Keenan

  • Member
  • Posts: 4,824
Re: stoned elm
« Reply #9 on: March 04, 2008, 12:34:45 pm »
  Oh ya!!  Been waiting to see another one of your great stone bows. Nice profile and great curves Jamie. Looks like ya got a bead drawn on the house cat or something.  Keenan
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: stoned elm
« Reply #10 on: March 04, 2008, 12:43:19 pm »
Nice Jamie. Have you never heat treaded Elm? A nice hardwood fire burnt down to coals works great. You just reflex the bow a bit and suspend it belly down about a foot over the coals till it turns browns, takes about 5 minutes
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline AndrewS

  • Member
  • Posts: 798
Re: stoned elm
« Reply #11 on: March 04, 2008, 12:51:28 pm »
Jamie i like your bow. Elm is good stuff.

...and I like your bicoloured socks ;D
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: stoned elm
« Reply #12 on: March 04, 2008, 02:28:40 pm »
 8) 8) 8) 8) 8)  8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)
What kind of elm is it?  Keenan, I was wondering myself if there was a cat lurking in the corner  ;D
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: stoned elm
« Reply #13 on: March 04, 2008, 02:30:58 pm »
This bow is the quintessential example of what self bows are all about. Such a fine weapon needs to shine so I did so with PhotoShop ;)

[attachment deleted by admin]
Logged
When you're retired, every day is Saturday

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: stoned elm
« Reply #14 on: March 04, 2008, 02:40:38 pm »
Nice work Jamie.  I need to finish a couple of stone bows I have started.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah
Pages: [1] 2 3
« previous next »