« previous next »
Pages: [1] 2

Author Topic: A productive day in the workshop  (Read 3771 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
A productive day in the workshop
« on: October 12, 2016, 09:18:32 pm »
The Florida guys aren't the only ones enjoying the cool and breezy weather.  I had a very productive day in my workshop and enjoyed the fall breeze.  I'm taking a break from hunting and trying to get a lot of projects wrapped up and starting on some new ones before I hit the woods hard again.  I started by shaping the handle on this knife for my daughter.  Its all done except for some sanding. 




I have 2 more knives that are almost done so I went ahead and got the scales ready for them.  This one is for me.  I used some osage burl that Stringman gave me.  I can't wait to see what they look like sanded smooth and a finish on them. 






I got a USA made Nicholson wood rasp a while back and decided it needed some osage scales.  I got them made and epoxied them on.  With more than half the day gone I switched into bow making mode.  I am trying to get a handful of bows roughed out so I can put them in the house to finish drying.  I will finish these up over the winter hopefully. 




The rasp scales glued on and my bow blanks cut out. 

Logged
I started out with nothin' and I still got most of it left

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: A productive day in the workshop
« Reply #1 on: October 12, 2016, 10:13:59 pm »
Looks like you been hard at it Clint.
Logged

Offline selfbow joe

  • Member
  • Posts: 996
  • 1-812-344-1590
Re: A productive day in the workshop
« Reply #2 on: October 12, 2016, 10:25:07 pm »
Looks like you been very busy.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: A productive day in the workshop
« Reply #3 on: October 12, 2016, 10:48:40 pm »
Looking good Clint, that burl and homemade micarta are going to look sweet
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: A productive day in the workshop
« Reply #4 on: October 12, 2016, 10:56:56 pm »
Looking good, Clint. Our cool and breezy days come with a name, though. :)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: A productive day in the workshop
« Reply #5 on: October 12, 2016, 11:14:03 pm »
We have had some beautiful weather lately. It was 34 degs this morning. Won't be long before first frost. Leaves are starting to turn colors.
 You got a lot done Clint. Nice winter projects
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A productive day in the workshop
« Reply #6 on: October 12, 2016, 11:21:19 pm »
Quote from: mullet on October 12, 2016, 10:56:56 pm
Looking good, Clint. Our cool and breezy days come with a name, though. :)


You can keep those storms with names.  The last one that made it this far north did a lot of wind damage. 
Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A productive day in the workshop
« Reply #7 on: October 12, 2016, 11:23:19 pm »
Quote from: Pat B on October 12, 2016, 11:14:03 pm
We have had some beautiful weather lately. It was 34 degs this morning. Won't be long before first frost. Leaves are starting to turn colors.
 You got a lot done Clint. Nice winter projects

It hasn't got anywhere near that cold here Pat.  I think the lowest I've seen is mid 50's at night. 
Logged
I started out with nothin' and I still got most of it left

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: A productive day in the workshop
« Reply #8 on: October 13, 2016, 03:51:42 am »
Looks like your gonna stay busy this winter in the shop.Nice looking prospects for bows and you've got quite a few knife blanks if I remember right.You got your wood stove you made all ready to use too.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline ---GUTSHOT--->

  • Member
  • Posts: 1,310
Re: A productive day in the workshop
« Reply #9 on: October 13, 2016, 07:08:21 am »
That's some nice looking knives you got going on. Also those bow blanks are looking good too.
Logged

Offline PNewton

  • Member
  • Posts: 400
Re: A productive day in the workshop
« Reply #10 on: October 13, 2016, 07:19:16 am »
Looks good Clint. A nice day in the shop.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A productive day in the workshop
« Reply #11 on: October 13, 2016, 07:40:04 am »
Quote from: Beadman on October 13, 2016, 03:51:42 am
Looks like your gonna stay busy this winter in the shop.Nice looking prospects for bows and you've got quite a few knife blanks if I remember right.You got your wood stove you made all ready to use too.

I need to put the chimney back up and it will be ready to go.  I'm going to wait a little while longer before doing that. 
Logged
I started out with nothin' and I still got most of it left

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: A productive day in the workshop
« Reply #12 on: October 13, 2016, 09:51:51 am »
Yep, looks like you been busy alright. :) Bow blanks look good but them knife scales will be beautiful. :) :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: A productive day in the workshop
« Reply #13 on: October 13, 2016, 10:36:39 am »
Great stuff Clint. You are an inspiration!! Those knives look like some gooders! dp
Logged
(:::.)    Osage music played daily. :)

Offline Urufu_Shinjiro

  • Member
  • Posts: 709
Re: A productive day in the workshop
« Reply #14 on: October 13, 2016, 11:09:43 am »
With all the projects you post here Clint when is it NOT a productive day in the shop for you, lol. Man I can't wait to see that burl finished up, that's gonna look awesome.
Logged
Pages: [1] 2
« previous next »