Author Topic: Tite Bond Hide glue  (Read 4277 times)

0 Members and 1 Guest are viewing this topic.

Offline hedgehog

  • Member
  • Posts: 24
Tite Bond Hide glue
« on: October 06, 2016, 10:16:54 am »
Has anyone used Tite Bond Hide glue for sinew backing a bow? I have 2 bottles and before I begin backing the new bow I thought I could inquire. Also curious if I should use my double boiler to bring the glue temp up to the same temp as when I use my granulated hide glue?
I have backed sinew backed many bows, but have always used the old method. Thanks,  Larry (Hedgehog)

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Tite Bond Hide glue
« Reply #1 on: October 06, 2016, 10:33:18 am »
I have used that glue on 2 diferent sinew bows and have had no problem also have used it in furnture making with good results but make sure you check the exsperation date on the bottle as well as a jell test it takes a little longer to jell but it gives you a long work time I added a little water for the sizing coat I think this glue has got a bad wrap due to people using exspired glue. If it is thick from cold temps you can run the.
Bottle under the hot water for a few minutes & it becomes thinner but no need for hot pot.
« Last Edit: October 06, 2016, 10:50:02 am by Stick Bender »
If you fear failure you will never Try !

Offline hedgehog

  • Member
  • Posts: 24
Re: Tite Bond Hide glue
« Reply #2 on: October 06, 2016, 10:46:09 am »
Stick Bender, Did you heat up the glueor use it cold?

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Tite Bond Hide glue
« Reply #3 on: October 06, 2016, 10:50:49 am »
Just modified my post above with info.
If you fear failure you will never Try !

Offline hedgehog

  • Member
  • Posts: 24
Re: Tite Bond Hide glue
« Reply #4 on: October 06, 2016, 11:04:19 am »
Thank you sir. I just have a difficult time believing sinew backing a bow can be this much easier and cleaner then the old way I have always done it.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tite Bond Hide glue
« Reply #5 on: October 06, 2016, 12:14:54 pm »
Liquid hide glue has a shelf life because of additives. If it is out of date it can take forever to set. I've ever used it but I've heard good and bad things about it for sinew backing.   I think I'd use Knox or granular hide glue for a sinew backed bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Tite Bond Hide glue
« Reply #6 on: October 06, 2016, 12:45:28 pm »
so is pearl glue the same as hide glue?

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Tite Bond Hide glue
« Reply #7 on: October 06, 2016, 12:47:48 pm »
I would take Pat B advice above my limited hands on exsperience he has made a heck of a lot of bows there is also some good info on that glue & others on Dean Torges web site I cant find the link but a quick google search will get you there
If you fear failure you will never Try !

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Tite Bond Hide glue
« Reply #8 on: October 06, 2016, 03:14:17 pm »
so is pearl glue the same as hide glue?

Pearl glue?  I suppose if you used Pearl Drums hide and simmered it slowly....
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Tite Bond Hide glue
« Reply #9 on: October 06, 2016, 03:43:43 pm »
well, he does make a good bow >:D

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Tite Bond Hide glue
« Reply #10 on: October 06, 2016, 03:59:58 pm »
Think mebbe should have said scotch glue pearl drops?

Offline PatM

  • Member
  • Posts: 6,737
Re: Tite Bond Hide glue
« Reply #11 on: October 06, 2016, 04:37:59 pm »
Pearl and granular are just two variations of hide glue. Granular is stronger and gels faster. Pearl  glue is used for applications requiring lower strength and longer working time.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Tite Bond Hide glue
« Reply #12 on: October 06, 2016, 06:12:13 pm »
Thanks Pat, starting first ever sinew job in next fortnight, was going to get pearl drops so that's saved me an expensive mistake :D

Offline PatM

  • Member
  • Posts: 6,737
Re: Tite Bond Hide glue
« Reply #13 on: October 06, 2016, 06:35:28 pm »
I would just use gelatin. I've had commercial glue end up very brittle in a flexing application. Gelatin never makes cracking noises.
 I think non-food grade glue can end up being somewhat decayed due to hides etc. breaking down before they are processed.

 That is going by the slight aged roadkill smell that emanates from it.

Offline bubby

  • Member
  • Posts: 11,054
Re: Tite Bond Hide glue
« Reply #14 on: October 06, 2016, 08:36:52 pm »
so is pearl glue the same as hide glue?

Pearl glue?  I suppose if you used Pearl Drums hide and simmered it slowly....


Take a long time to simmer that tough ol' bird down lol
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹