« previous next »
Pages: [1] 2

Author Topic: ISO  (Read 5640 times)

0 Members and 1 Guest are viewing this topic.

Offline LEGIONNAIRE

  • Member
  • Posts: 632
ISO
« on: September 21, 2016, 11:43:36 pm »
Hello Fellows I know that many of us have other hobbies so If you know anyone that can make this or if you can make this let me know. Im looking for a 2.5-3 inch in diameter metal ball with a 3/4 inch hole down the middle. I;m looking to build a Maze. Let me know if you anyone can make this. Thank you!

Cesar
Logged
CESAR

LEGIONNAIRE ARCHERY

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #1 on: September 22, 2016, 06:36:10 am »
I can get you a precision ball bearing that size, but good luck drilling through it...
Aaron
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: ISO
« Reply #2 on: September 22, 2016, 07:03:03 am »
Quote from: Aaron H (Falcon) on September 22, 2016, 06:36:10 am
I can get you a precision ball bearing that size, but good luck drilling through it...
Aaron

Could you anneal it before drilling?
Logged
I started out with nothin' and I still got most of it left

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #3 on: September 22, 2016, 07:37:36 am »
Yes Clint, and that would be the way to go.  BUT, I imagine you would still need a mill and a carbide bit to get through it, these things are hardened to the max.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #4 on: September 22, 2016, 09:27:04 am »
Looks like 2" is all I have at the moment
Logged

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: ISO
« Reply #5 on: September 22, 2016, 12:37:33 pm »
Aaron, thank you for the Reply. I dont have the tools to drill through it unfortunately. If anyone else can get something like that either metal or Stone that be great. 2 inch might be a little small too. Thank you for the help  :)
Logged
CESAR

LEGIONNAIRE ARCHERY

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: ISO
« Reply #6 on: September 22, 2016, 01:56:24 pm »
I would be willing to try to get a hole drilled in something for you. I have a full machine shop right next door to my welding shop. We do it all for each other. Sure they would give it a try. Keep me posted. dp
Logged
(:::.)    Osage music played daily. :)

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #7 on: September 22, 2016, 02:13:05 pm »
I could send DP that ball bearing if you want to give it a try.  Course it would still only be 2".   Either way, your call
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: ISO
« Reply #8 on: September 22, 2016, 03:30:31 pm »
There are some trailer balls that are 2 piece with a removable bolt
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: ISO
« Reply #9 on: September 22, 2016, 05:55:16 pm »
Just curious, what are you using it for?
Logged
I started out with nothin' and I still got most of it left

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #10 on: September 22, 2016, 06:00:18 pm »
Clint he said he wanted to build a maze
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: ISO
« Reply #11 on: September 22, 2016, 06:53:01 pm »
I don't know what that is
Logged
I started out with nothin' and I still got most of it left

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #12 on: September 22, 2016, 07:07:00 pm »
Oh, sorry Clint.   
Here you go.  Correct me if I am wrong Legionnaire
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: ISO
« Reply #13 on: September 22, 2016, 07:11:28 pm »
Ahhh.  A skull cracker.  A 3" steel ball bearing would be a lot of weight to swing.  It would sure do the job if it hit the target though. 
Logged
I started out with nothin' and I still got most of it left

Offline Aaron H

  • Member
  • Posts: 3,437
Re: ISO
« Reply #14 on: September 22, 2016, 07:29:44 pm »
At least I think that is what he is referring to
Logged
Pages: [1] 2
« previous next »