« previous next »
Pages: [1]

Author Topic: Snake skin backing  (Read 3027 times)

0 Members and 1 Guest are viewing this topic.

Offline rocko

  • Member
  • Posts: 10
Snake skin backing
« on: March 02, 2008, 08:38:53 pm »

I just finished putting the snake skin on an Osage bow that has a lot of character. My question is what to do with the edges. My original intention was to bring the skin over the edge and trim along the side of the bow, following the contours of the back. But I've been wondering if it would be better to fade the edges in on the back of the bow...not bring them over.
Any thoughts or experiences?
Logged

Offline Dano

  • Member
  • Posts: 1,349
Re: Snake skin backing
« Reply #1 on: March 02, 2008, 09:32:14 pm »
I always fade the edges, they blend in much better when the finish is applied. I use 220 grit on a rubber sanding block, and just work the edge.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline rocko

  • Member
  • Posts: 10
Re: Snake skin backing
« Reply #2 on: March 02, 2008, 09:44:49 pm »
Perfect! Thanks Dano.
 That's what I was hoping to be able to do, just wanted to hear it from someone else that it would work.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Snake skin backing
« Reply #3 on: March 03, 2008, 08:32:02 am »
What Dano said.Letts see some pictures when you are finished. :)
    Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline rocko

  • Member
  • Posts: 10
Re: Snake skin backing
« Reply #4 on: March 03, 2008, 10:19:42 am »
I'll do it!
Logged
Pages: [1]
« previous next »