Author Topic: Snaky Osage Split?  (Read 4263 times)

0 Members and 1 Guest are viewing this topic.

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Snaky Osage Split?
« Reply #15 on: July 10, 2016, 06:59:54 am »
Personally, I see one bow there.

As you weigh your options, keep in mind that you don't want any knots or pins in any of the four limb edges.
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Snaky Osage Split?
« Reply #16 on: July 10, 2016, 07:41:32 am »
I would make one bow out of that stave. 
I started out with nothin' and I still got most of it left

Offline Eric Krewson

  • Member
  • Posts: 5,433
Re: Snaky Osage Split?
« Reply #17 on: July 10, 2016, 08:19:13 am »
Go for it, you might pull it off or you can end up like the rest of us nay sayers who have tried for two and gotten none. It took me a bunch of tries before I finally saw the light and settled for one pristine stave and a lot of scrap wood for the burn pile.

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Snaky Osage Split?
« Reply #18 on: July 10, 2016, 08:52:52 am »
That is a sweet stave no doubt with a nice bow in it. Sure hate to see what you might have if you try to split it.
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline bentstick54

  • Member
  • Posts: 770
Re: Snaky Osage Split?
« Reply #19 on: July 10, 2016, 08:58:27 am »
I would be happy with 1 good stave and not risk wasting it if it were mine. Many a stave has been wasted by getting greedy. There are more crooked Osage trees growing than straight ones😀 :)

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Snaky Osage Split?
« Reply #20 on: July 10, 2016, 12:36:49 pm »
"good advice is seldom taken"  I forget who said that   :)   was it me :) :) :)

cool_98_555

  • Guest
Re: Snaky Osage Split?
« Reply #21 on: July 10, 2016, 12:59:19 pm »
Thank you for all your replies everyone.  It seems as though the general consensus is to not split, so I think I will follow your advice and make one awesome bow out of this stave.  Like I said, I haven't had a snaky stave this nice in a long time, and I should also mention that the rings are pretty thick (1/8" rings are thick in my opinion).  Looking forward to making this bow.  Thanks for all the advice guys!  I'll post pictures when i'm done with it.

Offline Mad Max

  • Member
  • Posts: 480
Re: Snaky Osage Split?
« Reply #22 on: July 11, 2016, 05:35:45 pm »
You got that on _bay.
I was bidding
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Snaky Osage Split?
« Reply #23 on: July 13, 2016, 02:13:18 pm »
You got that on _bay.
I was bidding

Kinda burns a little don't it?  That's a mighty pretty stave!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Snaky Osage Split?
« Reply #24 on: July 13, 2016, 02:31:34 pm »
If you don't get much osage I wouldn't try to split it. Make one cool bow and be proud of that. At that length you can pick the perfect section to place your bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC