Author Topic: how to determine draw length  (Read 2722 times)

0 Members and 2 Guests are viewing this topic.

Offline Spotted Dog

  • Member
  • Posts: 700
how to determine draw length
« on: June 02, 2016, 12:34:23 pm »
 I'm wondering how you all determine draw length on a bow.  For some reason I take 1/2 of ntn length
and then take off 5" . Mainly on short bows. :o
A three strand cord is not easily broken. Ecc.4:12

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: how to determine draw length
« Reply #1 on: June 02, 2016, 01:22:33 pm »
1/2 the length is a rule of thumb but tiller has to be perfect at that length. Add about 10% to that and you should be OK.  For sinew backed bows you can go half the n/n length.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: how to determine draw length
« Reply #2 on: June 02, 2016, 08:24:39 pm »
I double my draw and add at least 20% depending on the condition of the stave.
Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: how to determine draw length
« Reply #3 on: June 02, 2016, 08:59:29 pm »
also I take into consideration if the bow bends in the handle or how wide the limbs are,,, what the condition of  the back is etc etc,, if the bow wood is very good, maybe I make it bit on the short side,, if questionable I may over build a bit,, just depends,, for a good starting point what Jawge and Pat said,, :)

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: how to determine draw length
« Reply #4 on: June 03, 2016, 04:34:27 am »
I usually double the draw length and add the no moving section [handle and fads] for a non bending handle bow. That is pretty safe. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline loon

  • Member
  • Posts: 1,307
Re: how to determine draw length
« Reply #5 on: June 04, 2016, 11:11:06 pm »
Could a 64" Juniper, sinew backed static recurve (no sinew on the tips) draw 33"? Static portion on each limb probably 9" (18" total), I guess bendy handle and 1.25" wide...
So, I guess equivalent to a 54" static recurve bow 1" wide with a 28" draw,  15" non-bending. sounds a bit too demanding.

Not sure if drawing past the ear (shooting accurately) could be practical for hunting because of all the extra movement. For target shooting, shorter draw with light arrows is faster. Cheek draw is probably about ideal for me... :| but I really like the feel of drawing a bit past my ear Gao Ying style as well.

I really should start smaller... a nice 60" hickory D-bow with a 28.5" draw
« Last Edit: June 04, 2016, 11:14:22 pm by loon »

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: how to determine draw length
« Reply #6 on: June 05, 2016, 09:46:12 am »
  I'm a little slow.

  You build the bow to match the persons draw length. There's no set draw length to wood bows.It's how well you design and tiller the bow.

  YOU LET THE STAVE TELL YOU. HOW TO DESIGN THE BOW.

 I've tiller ed quite a few bows 30 and over. One 92# ash war bow 33"s.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: how to determine draw length
« Reply #7 on: June 05, 2016, 10:27:52 am »
I pull til it breaks then ease back a tad ;)
Del >:D
Health warning, these posts may contain traces of nut.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: how to determine draw length
« Reply #8 on: June 06, 2016, 01:05:05 pm »
That's how you know for sure Del.
A hot cup of coffee and a beautiful sunrise

Offline Spotted Dog

  • Member
  • Posts: 700
Re: how to determine draw length
« Reply #9 on: June 07, 2016, 02:28:52 pm »
 Just got back from a Texas wedding for a niece.  Thanks for the info.
A three strand cord is not easily broken. Ecc.4:12

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: how to determine draw length
« Reply #10 on: June 07, 2016, 05:01:40 pm »
I pull til it breaks then ease back a tad ;)
Del >:D

...and the next step in this method is to walk gingerly to nearest latrine and begin cleaning up your trousers!  Copious quantities of tissue paper and Lysol are a suggested best practice.   :o   :o   :o

OneBow

Offline loon

  • Member
  • Posts: 1,307
Re: how to determine draw length
« Reply #11 on: June 08, 2016, 10:24:32 pm »
1/2 seems to be the ratio for Ishi-style bows, which have working tips?
ded