Author Topic: A classic bow experiment  (Read 22930 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
A classic bow experiment
« on: April 28, 2016, 12:30:33 am »
I saw a bow like this several years ago at the Classic and wanted to try to make one.  The stave has paper thin rings.  So thin you can't distinguish them on the top half of the stave.  I removed the bark and sapwood with a draw knife.  Then I used a scraper to smooth the back out.  I never paid any attention to chasing a ring.  The back has numerous violations.  It looks like there might be close to 10 different rings violated on the back.  I sanded it to 400 grit and coated the back with super glue twice sanding after each coat.   Tomorrow I'm going to try to tiller it out and see what happens.  I'm 50/50 on if it makes it or not.  It will either be an interesting bow or an exciting explosion. 
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A classic bow experiment
« Reply #1 on: April 28, 2016, 12:34:50 am »
I'm going to try to build it with zero heat corrections.










I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A classic bow experiment
« Reply #2 on: April 28, 2016, 12:35:54 am »


I started out with nothin' and I still got most of it left

Offline bubby

  • Member
  • Posts: 11,054
Re: A classic bow experiment
« Reply #3 on: April 28, 2016, 01:18:59 am »
This should be cool
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: A classic bow experiment
« Reply #4 on: April 28, 2016, 01:44:42 am »
You taking bets? ;D

Offline Badger

  • Member
  • Posts: 8,124
Re: A classic bow experiment
« Reply #5 on: April 28, 2016, 01:46:13 am »
  I had about 20 of those in a years time. Theoretically fine grain like that should be less sensitive to popping than thick rings, I am curious to see what happens. I would sometimes have to chase 5 rings to get on not violated. 

mikekeswick

  • Guest
Re: A classic bow experiment
« Reply #6 on: April 28, 2016, 02:01:54 am »
I'd chase a ring :)

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: A classic bow experiment
« Reply #7 on: April 28, 2016, 02:18:48 am »
You go for it... I'm still sittin' on that fine ring Osage 'cos I'm chicken.
I'm a great believer in challenging the received wisdom.
Del
Health warning, these posts may contain traces of nut.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A classic bow experiment
« Reply #8 on: April 28, 2016, 02:21:45 am »
We will find out tomorrow.  I'll post a picture of the outcome. 
I started out with nothin' and I still got most of it left

Online bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: A classic bow experiment
« Reply #9 on: April 28, 2016, 03:49:49 am »
I'll be watching should have video of this.
A hot cup of coffee and a beautiful sunrise

Offline joachimM

  • Member
  • Posts: 675
  • Good - better - broken
Re: A classic bow experiment
« Reply #10 on: April 28, 2016, 06:09:36 am »
Should turn out fine if the design isnt extreme. Knots and pins are often imo more risky than such shallow ring violations.

Offline okie64

  • Member
  • Posts: 1,134
Re: A classic bow experiment
« Reply #11 on: April 28, 2016, 06:51:23 am »
Cool experiment, I'm betting that it holds Clint.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: A classic bow experiment
« Reply #12 on: April 28, 2016, 08:29:30 am »
I suspect that it will be OK but never having done a similar bow I am offering just an opinion. I haev violated tight grain around pins a bunch of times with no problems.

I saw a bow once that the woodwasp larva had made the back look like swiss cheese. The bow maker made a bow out of the stave just to see what would happen, nothing happened, the bow held up and was shooting fine.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: A classic bow experiment
« Reply #13 on: April 28, 2016, 11:03:30 am »
please just rawhide back it so it won't explode,,no need to risk breaking a nice stave,,

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: A classic bow experiment
« Reply #14 on: April 28, 2016, 11:50:25 am »
I'd burnish it and continue on with the experiment. I'm betting it will be a shooter.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?