« previous next »
Pages: [1] 2

Author Topic: A few questions about white oak board (new question added)  (Read 5819 times)

0 Members and 1 Guest are viewing this topic.

Offline arachnid

  • Member
  • Posts: 517
A few questions about white oak board (new question added)
« on: March 19, 2016, 04:02:23 pm »
Hi Guys.
I got my hands on a very straight grain white oak board. I wanted to get as many bows as I can out of this board so I cut it to 1 3/4" wide staves. I want to make two 30# bows (one practice bow for me and one for a friend starting archery). I was thinking on a pyramid design but I'm not sure about the width- is it too narrow? I've made a pyramid bow out of white oak but it was 2" wide at the fades. Should I make a parallel limb bow? (I'm making one bow for a 29" draw and one for 26" draw, both stiff handle)

Second question- I got some short pieces about 1/2" thick out of that board. Can I splice them and make a bendy handle?

Third and last- I want to add some reflex to the bows. I have bad experience with boiling the tips. Will steam work better?

Thanks

Dor
« Last Edit: March 25, 2016, 01:55:29 am by arachnid »
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: A few questions about white oak board
« Reply #1 on: March 19, 2016, 04:33:13 pm »
You should be fine at that thickness, start with the limbs even taper about 5/8" thick to start and tiller to weight from there.
Soak the tips a few hours and then steam 45 min and you should be hood i kind of steam/boil mine
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: A few questions about white oak board
« Reply #2 on: March 19, 2016, 04:58:37 pm »
1 3/4" is plenty wide for a 30# bow. For the 29" draw make it a few inches longer.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline arachnid

  • Member
  • Posts: 517
Re: A few questions about white oak board
« Reply #3 on: March 19, 2016, 06:11:38 pm »
 :'(thanks guys.
How about making  bendy handle from  spliced billets ?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: A few questions about white oak board
« Reply #4 on: March 19, 2016, 07:22:08 pm »
Not the best idea, make a nice pyramid with stiff handle and flipped tips, plus white oak likes a nice belly toasting
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline arachnid

  • Member
  • Posts: 517
Re: A few questions about white oak board
« Reply #5 on: March 20, 2016, 12:52:39 am »
When do I toast the belly? Before/after/during tillering?

And about steam bending- How much time to I need let the bow dry again before shooting it?
« Last Edit: March 20, 2016, 01:14:27 am by arachnid »
Logged

Offline arachnid

  • Member
  • Posts: 517
Re: A few questions about white oak board
« Reply #6 on: March 20, 2016, 08:23:44 am »
I`ve noticed that one stave is better then the other.
This one has a bit of a run-off on one limb (on the rest of the board the grain is straight):


What do you say? Can I leave it unbacked or should I back it (I have a paper-thin stripe of rewhide for backing)?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: A few questions about white oak board (Pic added)
« Reply #7 on: March 20, 2016, 08:32:11 am »
I see grain running out on a severe angle half way down the board?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline arachnid

  • Member
  • Posts: 517
Re: A few questions about white oak board (Pic added)
« Reply #8 on: March 20, 2016, 08:36:39 am »
Quote from: PEARL DRUMS on March 20, 2016, 08:32:11 am
I see grain running out on a severe angle half way down the board?

What do you call a "severe angle"? There is a grain run out, that for sure. I don`t know if it`s "severe".... :o ;)
I guess I should back it?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: A few questions about white oak board (Pic added)
« Reply #9 on: March 20, 2016, 08:42:26 am »
A few run outs are ok. But I see at least 5-6 before it gets blurry. I would back it, but I'm scared of boards. Nothing gets me running the other way like bending wood in a direction nature didn't intend.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline arachnid

  • Member
  • Posts: 517
Re: A few questions about white oak board (Pic added)
« Reply #10 on: March 20, 2016, 09:07:35 am »
Since I have no execs to staves, it's board or no bows for me :-\

I'll try to take a clearer picture.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: A few questions about white oak board (Pic added)
« Reply #11 on: March 20, 2016, 09:11:55 am »
Just don't let my fears scare you! We all have our own quirks.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: A few questions about white oak board (Pic added)
« Reply #12 on: March 20, 2016, 09:57:12 am »
How is the grain along the sides? That is as important as along the back.
 Rawhide will help prevent splinters from lifting but it won't prevent a lethal flaw.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: A few questions about white oak board (Pic added)
« Reply #13 on: March 20, 2016, 11:06:36 am »
If the edge grain is good i would go ahead with it, your not building a heavily strained bow at 30#.
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline arachnid

  • Member
  • Posts: 517
Re: A few questions about white oak board (Pic added)
« Reply #14 on: March 20, 2016, 11:19:55 am »
Here are some more pictures:

From the other way:


From above:


Edge grain:


I can spot 4 run-outs in the intended limb profile.
There question is not should I use it or not, it`s should I back it or not.

(I just realized that after 4 years of building bows, I still have SO much to learn.... thank God for PA :laugh:)

Dor
Logged
Pages: [1] 2
« previous next »