Author Topic: My first selfbow (Osage)  (Read 3938 times)

0 Members and 2 Guests are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
My first selfbow (Osage)
« on: March 14, 2016, 12:33:05 am »
This is my first selfbow and I like it a lot. It shoot really good and is a blast.  It's Osage, 66 t2t 45#@29" yew tips and arrow rest. With an Elk wrap and cork built up handle.  It got a little bit of snake on the top limb. Just under 1 1/4" at its widest. Thanks to Hunterbob for all the help!  And the guys on the trad. This is my plan A. Now on to B!  Any feed back on it is greatly appreciated. Thanks for looking. Tim
Freedom dies one compromise at a time. III%

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: My first selfbow (Osage)
« Reply #1 on: March 14, 2016, 02:42:02 am »
Well done that man :)
I'd say the upper limb is a tad weak in the inner 1/3. Maybe easing off the lower limb just a whisker will balance it up a bit (it's right that the lower is a bit stiffer)
Yew is an interesting choice for the tips as it is a bit soft, but I can see how that will work to provide a good surface for the string that will bed in.
Del
BTW... don't you hate the way the camera will focus on the background and not on the thing that is plumb centre of the picture? >:( Photographing bows can be a nightmare.
« Last Edit: March 14, 2016, 02:46:03 am by Del the cat »
Health warning, these posts may contain traces of nut.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: My first selfbow (Osage)
« Reply #2 on: March 14, 2016, 03:33:19 am »
Not too shabby at all for your first bow!

Del is right though about the tiller. But just to be sure could you post a braced and unbraced picture of your bow.

Looks like you used super glue on your handle wrap. I've made that kind of mistake with leather before. Next time try contact cement or a little elmers glue. The contact cement will hold it great.

Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Re: My first selfbow (Osage)
« Reply #3 on: March 14, 2016, 05:25:21 am »
Fantastic job mate. That bow looks great- you must be well chuffed!  :)
"No man ever broke his bow but another man found a use for the string" Irish proverb

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: My first selfbow (Osage)
« Reply #4 on: March 14, 2016, 07:19:15 am »
Not bad for a first, your second should be outstanding!
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Redhand

  • Member
  • Posts: 704
  • Marlen Murdock PM109458
Re: My first selfbow (Osage)
« Reply #5 on: March 14, 2016, 08:33:15 am »
Nice bow. Good job on your first bow.
Northern Ute

Offline Selfbowman

  • Member
  • Posts: 3,115
Re: My first selfbow (Osage)
« Reply #6 on: March 14, 2016, 08:45:25 am »
Wish my first would have turned out that good. Might have took a year to year and a half of learning curve from where I am now.  Arvin
Well I'll say!!  Osage is king!!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: My first selfbow (Osage)
« Reply #7 on: March 14, 2016, 08:58:11 am »
Looks pretty good. It is far better than my first. Very impressive.

Just check to see if the bow is balanced by drawing and noting if the bottom limb tips toward you or if the handle pressure seems uneven.

Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: My first selfbow (Osage)
« Reply #8 on: March 14, 2016, 10:21:21 am »
Looks pretty good especially your first.Better than mine too.Don't see the unbraced profile though.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: My first selfbow (Osage)
« Reply #9 on: March 14, 2016, 11:45:45 am »
Nice work Tim! Keep at er

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: My first selfbow (Osage)
« Reply #10 on: March 14, 2016, 11:47:26 am »
Thanks guys.  I'll get an  unbraced pic up ASAP. Patrick I did use contact cement for the handle but I did make the mistake of putting the handle wrap on before the true oil.
Freedom dies one compromise at a time. III%

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: My first selfbow (Osage)
« Reply #11 on: March 14, 2016, 11:55:26 am »
Hey Tim, great job!! Do you feel the addiction?  ;D
I'm happy to see you get it finished and betting the next one is much simpler. Those first ones can be a bearcat. I know mine was.
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: My first selfbow (Osage)
« Reply #12 on: March 15, 2016, 12:58:14 am »
Thanks guys.  I'll get an  unbraced pic up ASAP. Patrick I did use contact cement for the handle but I did make the mistake of putting the handle wrap on before the true oil.

Sorry about that bud.. Yup the Tru oil goes on then the wrap. Tru oil is also a protectant,  even though you are going to add a wrap always put some finish on the handle.

By the way,  the bow is really nice! Especially for your first.

Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline phyankord

  • Member
  • Posts: 84
  • Everyone starts somewhere
Re: My first selfbow (Osage)
« Reply #13 on: March 15, 2016, 01:07:19 am »
how do you tip a bow like that?