Author Topic: Poplar Quiver today (Read 4377 times)

nclonghunter · « **on:** March 11, 2016, 10:18:24 pm »

Got a chance to get out for a couple hours and decided to give a woven quiver a try. Cut some small saplings and split them along the length. Cut a poplar tree about 3 inches round and stripped bark. Used the bark to tie the splits together at the bottom, then began weaving the bark to make a quiver. The top or stopping point was the hardest to make neat but it was my first. Needs to dry for a while now.

Tracker0721 · « **Reply #1 on:** March 12, 2016, 12:38:07 pm »

Well that's cool! Gonna put some fur or moss in the bottom?

derrick morgan · « **Reply #2 on:** March 12, 2016, 01:40:17 pm »

nice work!

nclonghunter · « **Reply #3 on:** March 12, 2016, 02:35:01 pm »

Thanks, I plan on putting moss in the bottom when using hunting points. Also plan on a braintan strap. I made the quiver to be very rustic looking and I think I accomplished that..it is surprisingly light weight also and will get lighter as it drys. Only took about an hour and half to make.

Didn,t mention it above but I am using the small poplar tree to make a spear, so I am using almot all the sapling.

Stixnstones · « **Reply #4 on:** March 13, 2016, 07:24:46 am »

thats some awesome work there buddy. love a woven basket style quiver. gotta try it one day. you should do a build along.

Badly Bent · « **Reply #5 on:** March 13, 2016, 08:52:21 am »

Cool all natural quiver. I like the primitive style it has, nicely done.

Trapper Rob · « **Reply #6 on:** March 13, 2016, 12:56:11 pm »

Looks good about how long did it take you to make it?

Redhand · « **Reply #7 on:** March 13, 2016, 05:13:04 pm »

Nice work on that quiver. I like it.

Buckeye Guy · « **Reply #8 on:** March 13, 2016, 08:55:41 pm »

Good job

---GUTSHOT---> · « **Reply #9 on:** March 13, 2016, 09:11:13 pm »

That's just cool right there.

nclonghunter · « **Reply #10 on:** March 13, 2016, 09:43:35 pm »

Thanks everyone, I am finding as it dries the bark is shrinking a lot more than anticipated. I have started pushing it down to keep it tight and have lost 3-4 inches on the top. I will need to get some more strips to repair it. If you make one, make it about 6 inches longer than you want. That's the great part to doing these projects, learning what will happen and how to prepare for it.

Stoker · « **Reply #11 on:** March 14, 2016, 09:56:16 am »

Very cool.. Good to know about over building it
Thanks Leroy

Zuma · « **Reply #12 on:** March 14, 2016, 11:08:52 pm »

NC Keep on trucking brother. You always bring a goodie to the table.

Zuma

Pappy · « **Reply #13 on:** March 15, 2016, 04:15:59 am »

Very cool, nice work.

Pappy

Jodocus · « **Reply #14 on:** March 16, 2016, 02:44:13 pm »

neat, I like that style of quiver!

Primitive Archer