« previous next »
Pages: [1]

Author Topic: glue for take down  (Read 1588 times)

0 Members and 1 Guest are viewing this topic.

Offline derrick morgan

  • Member
  • Posts: 9
glue for take down
« on: March 09, 2016, 11:27:14 am »
hey folks,

i'm looking for advice on what kind of glue to use (respectively not to use) for gluing on take down sleeves.
suggestions for glue that i can easily find in europe would be especially helpful!

btw this is the first topic i start here, so hello everybody.
pleased to have found the site (i've been watching what y'all are doing for some time now)!
Logged
i was just listening to a derrick morgan song when i registered. my name is stefan.
i live in tyrol/europe.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: glue for take down
« Reply #1 on: March 09, 2016, 11:30:47 am »
Hi,  Derrick, and welcome.

You can get epoxy almost anywhere, and that is what I'd go with.
Logged

Stringman

  • Guest
Re: glue for take down
« Reply #2 on: March 09, 2016, 12:58:35 pm »
Welcome Stefan, a 2 part epoxy should work fine for the sleeves.

Glad you joined us and please post pics! So much easier for us to drool over... ;D
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: glue for take down
« Reply #3 on: March 09, 2016, 02:32:20 pm »
If you just get regular epoxy do not get the five minute type
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline derrick morgan

  • Member
  • Posts: 9
Re: glue for take down
« Reply #4 on: March 10, 2016, 05:56:10 pm »
ok, thanks.
and thanks for the warm welcome!
Logged
i was just listening to a derrick morgan song when i registered. my name is stefan.
i live in tyrol/europe.

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: glue for take down
« Reply #5 on: March 11, 2016, 12:57:09 am »
Not all epoxy adheres to metal, it may stick, but if you put the cheaper epoxy on metal just takes a slight jar to remove it, on flat surfaces.
Logged
Debating is an intellectual exchange of differing views...with no winners.

mikekeswick

  • Guest
Re: glue for take down
« Reply #6 on: March 11, 2016, 02:35:26 am »
Smooth On MT13
Logged

Offline derrick morgan

  • Member
  • Posts: 9
Re: glue for take down
« Reply #7 on: March 11, 2016, 12:48:10 pm »
so would you use something different, vinemaplebows?
i also heard something about epoxies being a bit soft...
Logged
i was just listening to a derrick morgan song when i registered. my name is stefan.
i live in tyrol/europe.
Pages: [1]
« previous next »