I finished up the last of the items on my to-do list. I put a layer of luan down in the storage area. I wanted to keep road moisture out and cover up the openings between the deck boards so the mosquitoes don't sneak in at night.
![](http://i666.photobucket.com/albums/vv22/Outlawstaves/20160416_175651_zpst8pkdfkg.jpg)
I really liked the looks of the old rusty hasp on the entry door but that was the only thing holding it shut. I was afraid it might break while on the road. It was pretty thin. I had a sturdier hasp but it wasn't rusty. I soaked it in vinegar to remove the zinc coating. It's already starting to rust.
![](http://i666.photobucket.com/albums/vv22/Outlawstaves/20160416_210445.png_zpsncgaufvt.jpeg)
I built a platform on the tongue to use as a work bench or whatever. I didn't want to drill into the frame so I used some all thread to make U bolts and put some tubing over them to keep from eating into the paint. When I get a welder I would like to weld some angle onto the frame and redo the bench with an angled cut on the ends instead of being stepped like it is now. I bolted a small vise onto a board that I can clamp to the bench. I'll be able to do some bow work back at camp now if I want to.
![](http://i666.photobucket.com/albums/vv22/Outlawstaves/20160416_175801_zpsbz93ppc6.jpg)
I took this old lantern that Jeb gave me and converted it over to a battery powered LED flicker bulb. When I get set up at camp I'll put a hanger for it on the side of the camper.
![](http://i666.photobucket.com/albums/vv22/Outlawstaves/20160416_205029_zpsd8rfw7co.jpg)
My Dad gave me this old rope bottom chair to use with the camper. It matches the look I'm going for. The only thing I have left to do is put the license plates and a small chainsaw sign on the camper if they get delivered before I leave.
![](http://i666.photobucket.com/albums/vv22/Outlawstaves/20160416_205139_zpse6atldgy.jpg)