« previous next »
Pages: [1] 2

Author Topic: Static recurve question?  (Read 3084 times)

0 Members and 1 Guest are viewing this topic.

Offline Red Tailed Hawk

  • Member
  • Posts: 75
Static recurve question?
« on: February 22, 2016, 12:03:47 pm »
  Will this 62" ntn Osage with static tips allow for a draw to 28" with a non bending handle? I don't intend on sinewing the back.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Static recurve question?
« Reply #1 on: February 22, 2016, 12:14:09 pm »
My opinion? Way too short to be healthy for long. Let the handle bend, and you are in there. 
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Red Tailed Hawk

  • Member
  • Posts: 75
Re: Static recurve question?
« Reply #2 on: February 22, 2016, 12:21:19 pm »
Thanks pd I was on the fence with this one.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Static recurve question?
« Reply #3 on: February 22, 2016, 12:24:03 pm »
It's not impossible to make it happen. We see it often. But, how are those same bows 3,4 or 5 years from now? Especially if they are regular shooters. I used to push it, I don't anymore. My flat bows are 65-66" long now, not 62 or 63". 
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Static recurve question?
« Reply #4 on: February 22, 2016, 01:27:42 pm »
Bring the limb tiller back to the handle. I use a small bulbous handle and I like to feel the handle give just a little as I hit full draw.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Red Tailed Hawk

  • Member
  • Posts: 75
Re: Static recurve question?
« Reply #5 on: February 22, 2016, 06:13:18 pm »
Thanks guys, will post pics if all goes well
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Static recurve question?
« Reply #6 on: February 24, 2016, 12:24:44 pm »
Marc St Louis could do it.   ;D

If I put in recurves that big on a short bow, I generally deflex the bow out of the handle.  With tips 2" ahead of the handle, I could make that bow for sure.  Tips 5" ahead? I'd kill it for sure....
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Static recurve question?
« Reply #7 on: February 24, 2016, 12:25:48 pm »
 Oh, also, it depends on the limb width.  1-3/4" is better than 1-3/8" in this case...
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Static recurve question?
« Reply #8 on: February 24, 2016, 12:32:51 pm »
Hmm, I would say yes. I've made a lot of statics with stiff handles under 60"
Here is an example: http://primitive-bows.com/osage-static-5528/
Logged
Simon
Bavaria, Germany

Offline Jodocus

  • Member
  • Posts: 897
Re: Static recurve question?
« Reply #9 on: February 24, 2016, 03:23:50 pm »
Absolutely possible, but the handle must bend some. I really like a hot looking curved shorty like this could be. Pearlie's right, it wont last forever, but hey, I'm usually well stocked with bows and have certain workhorses that get shot until they're done for. Bows are consumables after all, unless they're showpieces wich is fine as well as long as they're made carefully and functional.
Logged
Don't shoot!

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Static recurve question?
« Reply #10 on: February 24, 2016, 03:26:39 pm »
I've learned a lot of longevity/durability after having bows finally turn 5 plus years old and some having shots thousands upon thousands of arrows. There is so much more to the story than simply holding together for a picture and a few hundred shots.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Jodocus

  • Member
  • Posts: 897
Re: Static recurve question?
« Reply #11 on: February 24, 2016, 03:32:32 pm »
The bows I've made and shot heavily yet usually dropped in perfomance after around 2000 shots give or take. At that rate, it feels like I'm not making a lot of bows any more...  ;)
Logged
Don't shoot!

Offline DC

  • Member
  • Posts: 10,396
Re: Static recurve question?
« Reply #12 on: February 24, 2016, 04:16:50 pm »
I just did some rough figuring. I shoot 72 arrows(12 rounds of 6) about 5 days a week. Takes twenty minutes a day. At that rate I would shoot 2000 arrows in 5-6 weeks. I'll bet some guys shoot a lot more than that. Just trying to put this in perspective. You can put a lot of arrows through a bow with very little effort.
« Last Edit: February 24, 2016, 06:24:57 pm by DC »
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Static recurve question?
« Reply #13 on: February 24, 2016, 05:38:26 pm »
Quote from: DC on February 24, 2016, 04:16:50 pm
I just did some rough figuring. I shoot 72 arrows(12 rounds of 6) about 5 days a week. Takes twenty minutes a day. At that rate I would shoot 2000 arrows in 5-6 weeks. I'll bet some guys shoot a lot more than that. Just trying to put this in perspective. You van put a lot of arrows through a bow with very little effort.

Are you shooting at 20 yards yet.  Last year I was trying to shoot at the second field target which is 25 yards.  I will try for more at 25-30 yards.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline DC

  • Member
  • Posts: 10,396
Re: Static recurve question?
« Reply #14 on: February 24, 2016, 06:26:04 pm »
Still about 15.
Logged
Pages: [1] 2
« previous next »