Author Topic: MoJam 2016 - red oak BOARD bow challenge!  (Read 27061 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,690
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #15 on: February 02, 2016, 09:00:05 pm »
I have the ability to make RO look like Osage. I will bring somenice RO bows just remember they LOOK like Osage. ;)

Another naughty naughty fellow!   >:D

Considering this group of scoundrels would you expect anything less?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline lebhuntfish

  • Member
  • Posts: 3,800
  • If the wood will bend, I'll make it beautiful!
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #16 on: February 02, 2016, 09:11:50 pm »
Well enough of the chatter! I have one I will make into a pyramid bow. That is the only design I have not tried with RO. This will be my 6th attempt at RO the rest have been very unsuccessful. This will be a target bow and I intend to hit 40lbs. If it breaks I will use John's trick of making it look like Osage!
Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline bubby

  • Member
  • Posts: 11,054
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #17 on: February 02, 2016, 09:56:17 pm »
Patrick thats the best red oak design, i built one yhat was40# for my dad in law that is a screamer
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #18 on: February 02, 2016, 09:56:43 pm »
Longish and wideish makes 40# easy peezy!
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline DavidV

  • Member
  • Posts: 472
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #19 on: February 02, 2016, 10:55:41 pm »
What if I use white oak and dye it red?  :laugh: O:)

 ;D   naughty naughty feller!    ;D

Okay, I'll play along then...

I started this one a while ago from a home depot board. It's looong but only 1.5" wide. Riser is a chunk of curly oak.

Springfield, MO

Offline lebhuntfish

  • Member
  • Posts: 3,800
  • If the wood will bend, I'll make it beautiful!
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #20 on: February 02, 2016, 11:04:43 pm »
Looking good David!

Heat treat maybe?

Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #21 on: February 02, 2016, 11:05:53 pm »
Looks ellllegant!
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline make-n-break

  • Member
  • Posts: 378
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #22 on: February 02, 2016, 11:09:55 pm »
Seal em up good guys!! I brought my pride and joy red oak board bow "Saturn" with the patterned burlap backing to Mojam 2015 to let my friend shoot. Lebhuntfish, sleek and a few of the other fellas know which one I'm talking about. It was about 100 degrees and pouring rain the whole weekend. I had a primitive grease and beeswax finish, and the thing soaked up so much moisture that it went from 45# to 25# by the second day. A real bummer! I'll be going with a modern finish this year for sure.
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1

Offline sleek

  • Member
  • Posts: 6,690
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #23 on: February 02, 2016, 11:33:38 pm »
Seal em up good guys!! I brought my pride and joy red oak board bow "Saturn" with the patterned burlap backing to Mojam 2015 to let my friend shoot. Lebhuntfish, sleek and a few of the other fellas know which one I'm talking about. It was about 100 degrees and pouring rain the whole weekend. I had a primitive grease and beeswax finish, and the thing soaked up so much moisture that it went from 45# to 25# by the second day. A real bummer! I'll be going with a modern finish this year for sure.

Did that bow ever recover?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline DavidV

  • Member
  • Posts: 472
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #24 on: February 03, 2016, 10:02:48 am »
I probably won't heat treat this one Pat, haven't had good luck with heat and red oak in the past :/
Springfield, MO

Offline lebhuntfish

  • Member
  • Posts: 3,800
  • If the wood will bend, I'll make it beautiful!
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #25 on: February 03, 2016, 10:23:40 am »
Cool, I'm just wondering. Figured I would act like a noob with the red oak.
Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline sleek

  • Member
  • Posts: 6,690
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #26 on: February 03, 2016, 10:49:32 am »
The 80 pound one i made years ago was heat treated but only mildly.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline make-n-break

  • Member
  • Posts: 378
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #27 on: February 03, 2016, 11:48:03 am »
Sleek, it recovered only slightly to about 30#. It didn't take any more set either so I'm scratching my head as to why the damage was so permanent.

I prefer mild heat treating Red Oak too. Keeps the set down and makes 'em feel snappier to me.
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1

Offline DavidV

  • Member
  • Posts: 472
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #28 on: February 03, 2016, 01:15:36 pm »
I might go for it then if you guys say it works.
Springfield, MO

Offline tattoo dave

  • Member
  • Posts: 1,543
  • Rockford, MI
Re: MoJam 2016 - red oak BOARD bow challenge!
« Reply #29 on: February 03, 2016, 09:41:45 pm »
Oh man, one of my favorites I've made was a 62" bendy handle red oak bow with curves steamed into the tips. The only problem I ever had with that bow was when it burnt up in the house fire. Now you all got me wanting to make another ;). I won't make it to mojam, but I might play along anyway and build one if I can find the time.

Tattoo Dave
Rockford, MI