« previous next »
Pages: [1] 2

Author Topic: 2 piece take- down ideas?  (Read 4490 times)

0 Members and 2 Guests are viewing this topic.

Offline perry f.

  • Member
  • Posts: 20
2 piece take- down ideas?
« on: December 16, 2015, 10:50:30 am »
I would like to see everyone's 2 piece take-down systems. I have a couple billets I may tear into a later this year. Thanks in advance
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: 2 piece take- down ideas?
« Reply #1 on: December 16, 2015, 03:00:26 pm »
The best bet is to bye one, you can get one from echo archery, the owner Carson is a member here
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hrothgar

  • Member
  • Posts: 1,475
Re: 2 piece take- down ideas?
« Reply #2 on: December 17, 2015, 02:39:27 pm »
I've posted this before and it doesn't have a proper coupling, but it works. Its also cheap and easy.

4 1/2" metal conduit, 1" wide, slightly compressed into an oval shape.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: 2 piece take- down ideas?
« Reply #3 on: December 17, 2015, 04:25:41 pm »
is that oval enough to stop the limbs turning inside the tube?...it looks almost circular!!
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: 2 piece take- down ideas?
« Reply #4 on: December 17, 2015, 04:28:38 pm »
My money is on the sleeve from Echo as well.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline JW_Halverson

  • Member
  • Posts: 11,882
Re: 2 piece take- down ideas?
« Reply #5 on: December 17, 2015, 05:13:58 pm »
I have broken a lot of bows, just didn't save photos of them!   >:D

Call them "inadvertent and inconvenient take-downs".
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Jim Davis

  • Member
  • Posts: 1,337
  • Reparrows
    • Reparrows
Re: 2 piece take- down ideas?
« Reply #6 on: December 17, 2015, 05:35:04 pm »
Here's how I do it
Logged
Jim Davis

Kentucky--formerly Maine

Offline PatM

  • Member
  • Posts: 6,737
Re: 2 piece take- down ideas?
« Reply #7 on: December 17, 2015, 06:12:03 pm »
The glass/carbon sleeve is pretty popular as an easily done option with less fitting required.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: 2 piece take- down ideas?
« Reply #8 on: December 17, 2015, 07:45:34 pm »

The glass/carbon sleeve is pretty popular as an easily done option with less fitting required.



If you want a how to big jims bows has a how to on you tube
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hrothgar

  • Member
  • Posts: 1,475
Re: 2 piece take- down ideas?
« Reply #9 on: December 17, 2015, 07:58:09 pm »
Dragonman, twisting hasn't been much of a problem, I've made several this way, some oval tube some regular. I glue the bottom limb into the sleeve and if the other limb has any play a small piece of tape on the tyne will keep it snug. A 1" tube is enough handle for a #50 bow if you use a wood like osage.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: 2 piece take- down ideas?
« Reply #10 on: December 18, 2015, 11:36:25 am »
  I do it just like Hrothgar, except I cut the butt ends at an angle, maybe 30 degrees, so they overlap in the middle, and don't turn,  but about 3/4" of each piece is full round thickness.
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: 2 piece take- down ideas?
« Reply #11 on: December 18, 2015, 11:43:41 am »
square or rectangle stock works great, too.  You can glue on leather or wood slats to round out and shape the handle.
Logged

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: 2 piece take- down ideas?
« Reply #12 on: December 18, 2015, 02:01:42 pm »
Hrothgar, how thick  is   A1  tube   ( wall thickness)  in inches or mmms  ?  thanks

dave
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline Selfbowman

  • Member
  • Posts: 2,974
Re: 2 piece take- down ideas?
« Reply #13 on: December 18, 2015, 02:32:38 pm »
I use a bow bolt in mine. If I remember I will put a pic on later.
Logged
Well I'll say!!  Osage is king!!

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: 2 piece take- down ideas?
« Reply #14 on: December 18, 2015, 02:57:43 pm »
Quote from: PatM on December 17, 2015, 06:12:03 pm
The glass/carbon sleeve is pretty popular as an easily done option with less fitting required.

Do you remember what PA issue that was in?
Logged
Clatskanie, Oregon
Pages: [1] 2
« previous next »