« previous next »
Pages: 1 [2] 3

Author Topic: 3pc takedown - another advice needed plz (finished. FD pic added)  (Read 7889 times)

0 Members and 1 Guest are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #15 on: December 16, 2015, 10:33:50 am »
Never seen limb inserts in any I've owned? Black Widow, Bighorn and Robertson. Maybe they are "hidden".
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PatM

  • Member
  • Posts: 6,737
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #16 on: December 16, 2015, 11:02:00 am »
I meant more for alignment pins in general use. A pin and bushing is the standard. The dense materials typically used for this area on bows likely makes the bushing insert unnecessary.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #17 on: December 16, 2015, 11:13:53 am »
I know what you meant, just never seen one in bows I've owned. I think going through glass and wood takes care of that. I'm using osage self limbs on my project, so know inserts in my limbs either.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline arachnid

  • Member
  • Posts: 517
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #18 on: December 16, 2015, 11:41:01 am »
Well I got the limbs attached. Alignment is far from perfect but thankfully the limbs are still full width without any tapr, so hopefully I can fix it with the right width taper.

Any tips would be welcome
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #19 on: December 16, 2015, 11:47:36 am »
Run a string from tip to tip until it runs directly over your hex bolts in-line, that's your bows true centerline.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline arachnid

  • Member
  • Posts: 517
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #20 on: December 16, 2015, 12:27:33 pm »
Exactly what I did PD. I have enough width to taper the limbs to alignment.. Hope I don't mess this up... :laugh:
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #21 on: December 16, 2015, 12:40:52 pm »
Sounds like you are well on your way my one and only Israeli friend :)

That's just one of the cool aspects regarding PA. You get the opportunity to talk to people from all over the world. Like you and Simon my Deutschland comrade. I know we have some Finnish folks on here to. Plus all those English blokes. It's a great opportunity indeed!
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline arachnid

  • Member
  • Posts: 517
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #22 on: December 16, 2015, 01:09:51 pm »
Quote from: PEARL DRUMS on December 16, 2015, 12:40:52 pm
Sounds like you are well on your way my one and only Israeli friend :)

That's just one of the cool aspects regarding PA. You get the opportunity to talk to people from all over the world. Like you and Simon my Deutschland comrade. I know we have some Finnish folks on here to. Plus all those English blokes. It's a great opportunity indeed!

Right you are sir.... the internet has mad to world much smaller! :laugh:
Thanks for the help and tips. Hope I`ll have a bow to show in the coming days...
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #23 on: December 16, 2015, 07:38:14 pm »
When i built mine i put tee nuts inside the riser and used two bolts per limb
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #24 on: December 16, 2015, 07:41:44 pm »



Put the tee nuts in between the hickory and walnut
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline arachnid

  • Member
  • Posts: 517
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #25 on: December 17, 2015, 12:40:05 am »
I remember that bow Bubby... Stunning craftsmanship.
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Wooden dowl as an alignment pin (3pc takedown)
« Reply #26 on: December 17, 2015, 02:44:11 pm »
I used 1 bolt and a 1/4" steel pin.  Bought some 1/4" round stock at the local hardware store.  Make yourself a drilling jig.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline arachnid

  • Member
  • Posts: 517
Re: Wooden dowl as an alignment pin (3pc takedown)- another advice needed plz
« Reply #27 on: December 25, 2015, 05:07:43 am »
So... I got the limbs pretty much inline and got the bow tillered. Ended up 38#@26" which is ok... it`s going to be a fun stomping bow for my backpack.
BUT.... I took set during tillering and lost some reflex. I shot it today and it`s a fun little shooter, but I think it`s too slow. I doesn`t have a lot of early DW. So I realy want to re-add some reflex to the limbs. I thought of laminating a thin piece of ipe on the belly (and reflex it on a form) and re-tiller (although it`ll add more weight to the tips. I also have a thin piece of oak, maybe it'll be better?). Will it work?
If there`s another way to do it (beside sinew...) I`ll be happy to know.

Thanks
« Last Edit: December 25, 2015, 06:10:16 am by arachnid »
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Wooden dowl as an alignment pin (3pc takedown)- another advice needed plz
« Reply #28 on: December 25, 2015, 07:44:57 am »
Self limbs or laminated limbs?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline arachnid

  • Member
  • Posts: 517
Re: Wooden dowl as an alignment pin (3pc takedown)- another advice needed plz
« Reply #29 on: December 25, 2015, 08:37:16 am »
Quote from: PEARL DRUMS on December 25, 2015, 07:44:57 am
Self limbs or laminated limbs?

Laminated (ipe\boo). I'm thinking of adding the thin lamination only on the tip section.
Logged
Pages: 1 [2] 3
« previous next »